SEATEC

Fuse for ANL fuse holder. Excellent for powerful bow thrusters, winches and inverters. Available in different versions. Matching ANL fuse holders available separately. Note Please note that the fuses are designed for an M8 bolt. The colour of the fuse housing may vary! This does not affect the functionality. Fuses carrying high currents heat up. The fuse holder and the cable lugs of the connecting cables must be able to absorb this heat and release it to the environment without excessive thermal overload. If high value fuses are required in an installation, it is advisable to also use heavy-duty fuse holders.

BLUE SEA

High-load fuse holder for ANL fuses. Available in open design. The Blue Sea - Holder AK2 is suitable for max. 300 A / 32 V DC, connecting bolt: M8, dim .: L115 x W38 x H59 mm. Note: Fuses not included.

SEATEC

This ANL fuse block is suitable for fuses up to 750 amps. The fuse holder also has a cover that protects the fuse from splashing water and dust. With two extra connections to allow easy changing of the fuse. Matching fuses are available separately. Technical data: Operating voltage: 12-24V Load capacity: 20 A to 750 A (DC) Connection bolt thread: M8 Max. connection cable cross-section: 100 mm²

SEATEC

Robust and compact ATO fuse box for up to 12 appliances. Maximum load per appliance 30 A, with a maximum system load of 100 A. If a fuse blows, an LED indicator shows the relevant fuse, allowing for easy replacement. Fuses have a positive distribution bus and a negative bus for the connected loads. Supplied with screws and labelling set. Supplied with the following ATO fuses: 6x 5 A orange 6x 10 A red 6x 15 A blue 6x 20 A yellow Input voltage: 12V-24V DC With fuse (6x 5 A, 10 A, 15 A, 20 A each) Connections: Bolts: 2 x M5 Screws: 24 x M4 Dimensions (LxWxH): 138 x 85 x 36 mm Hole spacing (LxW): 123 x 70 mm Screw hole Ø: approx. 5 mm

SEATEC

Compact ATO fuse box for up to 6 appliances. Load capacity up to 20 amps per consumer (max. system load 75 amps). This fuse box has a positive distribution bus and a negative bus. Incl. fuses (4x 5 A, 2x 10 A, 2x 15 A, 4x 20 A). Technical data: Max. fuse size: 20 A Max. system load: 75 A Max. operating voltage: 32 V DC Dimensions (LxWxH): 120 x 50 x 52 mm Hole spacing: 100 x 30 mm Connections threaded bolts: M6 Connection screws: M4

BLUE SEA

Waterproof in-line fuse holder for ATO® fuses. Supplied with 12 AWG pigtails (cross-section: 3.1 mm²). Suitable for max. 30 A fuse Amperage (fuse not included).

SEATEC

In-line fuse holder with protective cap for ATC or ATO blade-type fuses. When the cap is attached the fuse holder is protected against dust and water jets (IP55 standard). Supplied with cable (approx. 26 cm) that forms a ring from one side of the fuse holder to the other and must be cut through and stripped as required for the installation of cable lugs or (crimp) connectors. Fuse not included. Max. load capacity: 32 V DC / 30 A Connecting cable: AWG 12 or 3.3 mm², fine-wire, tinned wire Cable length: approx. 26 cm Temperature range: - 5° C to + 85° C Protection class: IP55 Installation note Fuse holders are usually mounted as close as possible to the energy source, for example with a ring cable terminal directly to the positive pole of the battery. The wire leading from the the other half of the fuse holder is connected to the positive wire of the circuit to be protected using a suitable crimp cable lug. Ring cable terminals and butts must be suitable for 2.5mm² to 6mm² wire size and are identifiable by their yellow colour. Ring cable terminals: M4 (4 mm ring-inner-Ø) = SVB-# 63748, M5 = 63774, M6 = 63737, M8 = 63738, M10 = 63758. Butt connector = 63732. Suitable crimper = 51930.

SEATEC

Individual car/ATO flat-plug fuses in different sizes.

CARLINGTECH

These M-Series hydraulic-magnetic circuit breakers are equipped with an additional LED light in the rocker switch. The units can also be used as ON/OFF switches. Available in different versions.

CARLINGTECH

Hydraulic-magnetic M-Series circuit breakers. Semi-time-lag design. Cut out dimensions: 17.3 x 35 mm (installation depth: approx. 40 mm). Outer dimensions: 19.6 x 39.7 mm. The switches can also be used as on/off switches. 1-pole version. Available in various versions, starting at 1 Amp. Note: The manufacturers code for decoding data sheet details: MD1-B34-xxx-3-A35-B-C

CARLINGTECH

These heavy-load C-Series circuit breakers, semi-time-lag version, allows coupling / connecting in a series to increase the current. Several models are available.

QUICK

The Quick hydraulic magnetic circuit breaker is a specific protection when using direct current and is most important to avoid any irretrievable damages to the electric equipment onbord, such as windlasses, winches, warping winches, etc. In over-current situations they will break the circuit to protect the equipment. The protection resetting is manual. The hydraulic magnetic circuit breaker can be set to 12 and 24 Volt by simple installation. It can be fixed in any area onboard. Dimensions: 87 x 50 mm, installation depth: 67 mm. Available in 40 to 200 amp configurations.

SEATEC

High-performance automatic circuit breaker with manual reset button and thermal fuse to interrupt the circuit. Suitable for 12 - 48 V electrical systems. This circuit breaker features a manual reset button and protects your on-board electrical system and large consumers from overload and damage. Once tripped, the reset switch can be flipped up again to restore the circuit. The automatic circuit breaker is perfect for use on boats due to the watertight housing and waterproof silicone coverings for the poles. Data: For voltages: 12 - 48 V DC With reset button Surface mount Dimensions: L 73.8 mm x W 48.1 mm x H 44 mm

LOFRANS

Smart design! This thermal circuit breaker looks elegant and protects the electric motor of windlasses. Available in different versions.

CARLINGTECH

Hydraulic-magnetic 100 A CARLINGTECH C-Series circuit breaker for DC systems, slow tripping characteristic. The maximum current can be multiplied by parallel connection and mechanical coupling of the switch knob of several machines. (Make sure that the cable cross-sections are large enough.) Technical specifications Operation: hydraulic / magnetic Characteristic: DC, slow Elec. connection: 2x 1/4"-20 threaded bolt (suitable for 6 mm ring cable lugs) Required mounting hole in the panel: 36.8 x 19.3 mm (1.448" x 0.76") Distance between mounting holes: 52.4 mm (2.062") Fixing points in the switch panel: 2x M3x5 mm threaded stud holes Dimensions Total height incl. switch knob and connections: approx. 80 mm (3.17") Side length: 63.5 mm (2.5") Width: 19.2 mm (0.755") Colour: Black

Unknown Brand

Single pole thermal overcurrent circuit breaker for series 100 swtich panel. With spring-switch mechanism and controlled release for reliable performance. Conforms to the new guidelines for mechanical switching devices EN 60934. Technical data: Cut-out dimension: 22 x 11.3 mm. Approved for DC 48 V / AC 240 V

SEATEC

For 6 blade fuses up to 30 amps. Comes with waterproof cover. Splashproof. Fuses sold separately.

BLUE SEA

Compact fuse, connection and junction box for 12 positions. Position capacity up to 30 A. Max. system capacity 100 A. The fuse block also serves as distributor system for the ground line.

BLUE SEA

Compact fuse, connection and junction box for 6 positions. Position capacity up to 30 A. max. system capacity 100 A. The fuse block also serves as distributor system for the ground line.

BLUE SEA

Compact fuse, connection and junction box for 6 positions. Position capacity up to 30 A. Max. system capacity 100 A. The fuse block also serves as distributor system for the ground line.

BLUE SEA

Fuse holder for MIDI with 8 mm bolt diameter, load capacity up to 200 amps. This fuse holder is extremely robust and can be used in engine compartments due to its high-quality materials and the ISO 8846 / EN 28846 standard.

SEATEC

ATO fuse set containing a total of 10 fuses: 2x 7.5 A / 2x 10 A / 3x 15 A / 1x 20 A / 1x 25 A / 1x 30 A.

BLUE SEA

Locate blown fuses quickly and easily, even in the dark! If a fuse blows, an LED light on precisely this fuse switches on. 30 pieces, 3A - 40A.

BEPMARINE

Fuse holder for ANL and STS high-load fuses. Suitable for up to 750 ampere fuses. Excellent for powerful bow thrusters, winches and inverters. Only suitable for ANL and STS fuses. Dimensions: 98 x 49 x 54 mm. Delivery without ANL / STS fuse. Connection: 10 mm threaded bolt.

MASTERVOLT

Robust 500 A class T fuse for your MasterShunt 500. Technical specifications Max. voltage: 160 V DC, 300 V AC Nominal current: 500 A Dimensions Length: approx. 78 mm Distance between holes approx. 52 mm Bore Ø approx. 12 mm Note This 500 A Class-T fuse does not fit in the fuse holders item no. 25821 and 25891.

BLUE SEA

MAXI fuse, available in different versions. Fits the MAXI fuse holder.

BLUE SEA

MAXI fuse block with transparent plastic cover plate, which serves as protection against contact with conductive parts and completely seals the fuse block. Spark protected - therefore recommended for use in the engine compartment or in the immediate vicinity of your batteries. Low contact resistance, as the contact surfaces are pressed firmly onto the fuse connections by the cable fixing screws. Matching fuses are available optionally. Technical specifications Max. operating voltage 32V DC Resilient to: Max. 80 A For cables up to: 25 mm² Screw M5 Torque 2.8Nm (25 in-lb) Mounting screws Ø Max. 5 mm Dimensions (WxHxD) 52 x 71 x 37 mm

VICTRON

6-way fuse holder with 5-way busbar and cover, suitable for Mega fuses. Technical data Dimensions (L x W x H including cover): 181.5 x 88 x 50.9 mm Distance between the mounting holes: 160 x 61 mm Mounting holes: 4x 6.2 mm Ø Connector bolts/nuts: M8 Material: Steel, galvanised Load capacity: 32 V, total max. 250 A Note Supplied without fuses. These are optionally available and must be selected according to requirements. Included in delivery: 1x plastic support plate, 1x cover, 1x 5-way busbar, 12x M8 screw, 5 x M8 nut (flat), 14 x M8 nut (standard), 19x washer, 12x spring washer. The item comes as a kit. For application in maritime environments, we recommend using corrosion protection products such as WetProtect.

BLUE SEA

MEGA fuse holders and fuses are ideal for protecting devices and cables with high nominal currents. The fuse holder is extremely robust and can be used in engine compartments due to its high-quality materials and the ISO 8846 / EN 28846 standard. MEGA fuses are available separately. This fuse holder is intended for fixed, stationary installation. An integrated seal protects the fuse against water ( IP66 ) and allows the holder to be used in potentially explosive environments. This holder is compatible with MEGA and AMG fuse types up to 300 A. Fuse and cables are connected via separate screws, which enables fuses to be replaced without needing to disconnect the connection cables, helping to avoid short-circuits especially in cramped installations. Detachable areas in the transparent cover allow 3-sided insertion and installation of connection cables up to 25 mm² (AWG 4/0). The transparent cover is connected to the holder by a flexible plastic strip, so it cannot get lost and is easy to open/close thanks to the snap levers on the side. Nominal voltage: 32 V DC. Bolt / screw diameter: 8 mm (5/16"). Recommended tightening torque: 13.5 Nm (120 in-lb). Dimensions (LxWxH): approx. 123 x 39 x 43 mm. Cable lugs and fuses are available separately.

Unknown Brand

MEGA fuse holders and fuses are ideal for protecting devices and cables with high nominal currents. The fuse holders are extremely robust and can also be used in harsh conditions due to the high-quality materials. MEGA fuses are available separately.