RAYMARINE

Cyclone radars from Raymarine provide mariners with unmatched situational awareness, gving them the confidence to navigate busy waterways with ease. Each model features innovative technology, such as beam sharpening, detection capabilites and bird mode, and is sure to impress with high speed 60 RPM imaging. Delivery includes 15 m radar cable. Made for Extremes The radar has been designed for use in winds of up to 100 knots and can therefore withstand the most extreme weather conditions. Meets the commercial grade IEC 62388 standard for ship bourne radar. 360° Degrees of Awareness Fast 60 RPM rotational speed delivers accurate target tracking for reliable 360° situational awareness. Doppler and ARPA Target Tracking Integrated Doppler target tracking makes it easy to interpret dangerous and safe targets. ARPA technology additionally enables professional target tracking of up to 50 targets with the same advanced ARPA technology. . RangeFusion Technology RangeFusion technology combines short and long pulses to quickly and clearly identify and display both close range and distant targets in a single high-resolution radar image that is quick and easy to interpret. Designed with Fishing Intelligence The Cyclone is performance tuned for locating sea birds. This means gain and tune settings are intelligently optimised for imaging distant sea birds. Low Profile and Adaptable Installation Options Standing at just 335 mm, the radar features an impressively low profile. Furthermore, the antenna base has a built-in cable gland that neatly conceals all cable connections. Technical data Power supply 10.2 - 31.2 V DC Power consumption 70 W (typical) 170 W (max.) Operating temperature range -25 to +55 °C Antenna size 121 cm Output power 55 W Max. range 72 nm Rotation speed 12 / 24 / 36 / 48 / 60 RPM Beam width (vertical) 25° Beam width (horizontal) 1.99° Boot up time 40 seconds Transmitter frequency 9370 / 9400 / 9430 MHz (selectable) Receiver characteristic Linear Receiver noise Less than 5 dB Data connection 1x Raynet connector Waterproof IPX6 Max. wind speed 100 kts Dimensions Length: 1336 mm Pedestal: 388 x 360 x 335 Weight: 25 kg Included Open array radar, VCM100, 15 m power cable, 15 m data cable and mounting material Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Doppler mode (M)ARPA

RAYMARINE

Cyclone radars from Raymarine provide mariners with unmatched situational awareness, gving them the confidence to navigate busy waterways with ease. Each model features innovative technology, such as beam sharpening, detection capabilites and bird mode, and is sure to impress with high speed 60 RPM imaging. Delivery includes 15 m radar cable. Made for Extremes The radar has been designed for use in winds of up to 100 knots and can therefore withstand the most extreme weather conditions. Meets the commercial grade IEC 62388 standard for ship bourne radar. 360° Degrees of Awareness Fast 60 RPM rotational speed delivers accurate target tracking for reliable 360° situational awareness. Doppler and ARPA Target Tracking Integrated Doppler target tracking makes it easy to interpret dangerous and safe targets. ARPA technology additionally enables professional target tracking of up to 50 targets with the same advanced ARPA technology. . RangeFusion Technology RangeFusion technology combines short and long pulses to quickly and clearly identify and display both close range and distant targets in a single high-resolution radar image that is quick and easy to interpret. Designed with Fishing Intelligence The Cyclone is performance tuned for locating sea birds. This means gain and tune settings are intelligently optimised for imaging distant sea birds. Low Profile and Adaptable Installation Options Standing at just 335 mm, the radar features an impressively low profile. Furthermore, the antenna base has a built-in cable gland that neatly conceals all cable connections. Technical data Power supply 10.2 - 31.2 V DC Power consumption 70 W (typical) 170 W (max.) Operating temperature range -25 to +55 °C Antenna size 182 cm Output power 55 W Max. range 72 nm Rotation speed 12 / 24 / 36 / 48 / 60 RPM Beam width (vertical) 25° Beam width (horizontal) 1.32° Boot up time 40 seconds Transmitter frequency 9370 / 9400 / 9430 MHz (selectable) Receiver characteristic Linear Receiver noise Less than 5 dB Data connection 1x Raynet connector Waterproof IPX6 Max. wind speed 100 kts Dimensions Length: 1945 mm Pedestal: 388 x 360 x 335 Weight: 28 kg Included Open array radar, VCM100, power cable, data cable and mounting material Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Doppler mode (M)ARPA

RAYMARINE

Cyclone radars from Raymarine provide mariners with unmatched situational awareness, gving them the confidence to navigate busy waterways with ease. Each model features innovative technology, such as beam sharpening, detection capabilites and bird mode, and is sure to impress with high speed 60 RPM imaging. Delivery includes 15 m radar cable. Made for Extremes The radar has been designed for use in winds of up to 100 knots and can therefore withstand the most extreme weather conditions. Meets the commercial grade IEC 62388 standard for ship bourne radar. 360° Degrees of Awareness Fast 60 RPM rotational speed delivers accurate target tracking for reliable 360° situational awareness. Doppler and ARPA Target Tracking Integrated Doppler target tracking makes it easy to interpret dangerous and safe targets. ARPA technology additionally enables professional target tracking of up to 50 targets with the same advanced ARPA technology. . RangeFusion Technology RangeFusion technology combines short and long pulses to quickly and clearly identify and display both close range and distant targets in a single high-resolution radar image that is quick and easy to interpret. Designed with Fishing Intelligence The Cyclone is performance tuned for locating sea birds. This means gain and tune settings are intelligently optimised for imaging distant sea birds. Low Profile and Adaptable Installation Options Standing at just 335 mm, the radar features an impressively low profile. Furthermore, the antenna base has a built-in cable gland that neatly conceals all cable connections. Technical data Power supply 10.2 - 31.2 V DC Power consumption 70 W (typical) 170 W (max.) Operating temperature range -25 to +55 °C Antenna size 91 cm Output power 55 W Max. range 72 nm Rotation speed 12 / 24 / 36 / 48 / 60 RPM Beam width (vertical) 25° Beam width (horizontal) 2.83° Boot up time 40 seconds Transmitter frequency 9370 / 9400 / 9430 MHz (selectable) Receiver characteristic Linear Receiver noise Less than 5 dB Data connection 1x Raynet connector Waterproof IPX6 Max. wind speed 100 kts Dimensions Length (antenna beam): 1031 mm Pedestal: 388 x 360 x 335 Weight: 23 kg Included Open array radar, VCM100, 15 m power cable, 15 m data cable and mounting material Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Doppler mode (M)ARPA

RAYMARINE

Cyclone Pro radars from Raymarine provide mariners with unmatched situational awareness, gving them the confidence to navigate busy waterways with ease. Each model features innovative technology, such as beam sharpening, detection capabilites and bird mode, and is sure to impress with high speed 60 RPM imaging. Delivery includes 15 m radar cable. Made for Extremes The radar has been designed for use in winds of up to 100 knots and can therefore withstand the most extreme weather conditions. Meets the commercial grade IEC 62388 standard for ship bourne radar. 360° Degrees of Awareness Fast 60 RPM rotational speed delivers accurate target tracking for reliable 360° situational awareness. Doppler and ARPA Target Tracking Integrated Doppler target tracking makes it easy to interpret dangerous and safe targets. ARPA technology additionally enables professional target tracking of up to 50 targets with the same advanced ARPA technology. . RangeFusion Technology RangeFusion technology combines short and long pulses to quickly and clearly identify and display both close range and distant targets in a single high-resolution radar image that is quick and easy to interpret. Designed with Fishing Intelligence The Cyclone Pro is performance tuned for locating sea birds. This means gain and tune settings are intelligently optimised for imaging distant sea birds. Low Profile and Adaptable Installation Options Standing at just 335 mm, the radar features an impressively low profile. Furthermore, the antenna base has a built-in cable gland that neatly conceals all cable connections. Technical data Power supply 10.2 - 31.2 V DC Power consumption 95 W (typical) 195 W (max.) Operating temperature range -25 to +55 °C Antenna size 121 cm Output power 110 W Max. range 96 nm Rotation speed 12 / 24 / 36 / 48 / 60 RPM Beam width (vertical) 25° Beam width (horizontal) 1.99° Boot up time 40 seconds Transmitter frequency 9370 / 9400 / 9430 MHz (selectable) Receiver characteristic Linear Receiver noise Less than 5 dB Data connection 1x Raynet connector Waterproof IPX6 Max. wind speed 100 kts Dimensions Length: 1336 mm Pedestal: 388 x 360 x 335 Weight: 25 kg Included Open array radar, VCM100, 15 m power cable, 15 m data cable and mounting material Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Doppler mode (M)ARPA

RAYMARINE

Cyclone Pro radars from Raymarine provide mariners with unmatched situational awareness, gving them the confidence to navigate busy waterways with ease. Each model features innovative technology, such as beam sharpening, detection capabilites and bird mode, and is sure to impress with high speed 60 RPM imaging. Delivery includes 15 m radar cable. Made for Extremes The radar has been designed for use in winds of up to 100 knots and can therefore withstand the most extreme weather conditions. Meets the commercial grade IEC 62388 standard for ship bourne radar. 360° Degrees of Awareness Fast 60 RPM rotational speed delivers accurate target tracking for reliable 360° situational awareness. Doppler and ARPA Target Tracking Integrated Doppler target tracking makes it easy to interpret dangerous and safe targets. ARPA technology additionally enables professional target tracking of up to 50 targets with the same advanced ARPA technology. . RangeFusion Technology RangeFusion technology combines short and long pulses to quickly and clearly identify and display both close range and distant targets in a single high-resolution radar image that is quick and easy to interpret. Designed with Fishing Intelligence The Cyclone Pro is performance tuned for locating sea birds. This means gain and tune settings are intelligently optimised for imaging distant sea birds. Low Profile and Adaptable Installation Options Standing at just 335 mm, the radar features an impressively low profile. Furthermore, the antenna base has a built-in cable gland that neatly conceals all cable connections. Technical data Power supply 10.2 - 31.2 V DC Power consumption 95 W (typical) 195 W (max.) Operating temperature range -25 to +55 °C Antenna size 182 cm Output power 110 W Max. range 96 nm Rotation speed 12 / 24 / 36 / 48 / 60 RPM Beam width (vertical) 25° Beam width (horizontal) 1.32° Boot up time 40 seconds Transmitter frequency 9370 / 9400 / 9430 MHz (selectable) Receiver characteristic Linear Receiver noise Less than 5 dB Data connection 1x Raynet connector Waterproof IPX6 Max. wind speed 100 kts Dimensions Length: 1945 mm Pedestal: 388 x 360 x 335 Weight: 28 kg Included Open array radar, VCM100, 15 m power cable, 15 m data cable and mounting material Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Doppler mode (M)ARPA

RAYMARINE

Cyclone Pro radars from Raymarine provide mariners with unmatched situational awareness, gving them the confidence to navigate busy waterways with ease. Each model features innovative technology, such as beam sharpening, detection capabilites and bird mode, and is sure to impress with high speed 60 RPM imaging. Delivery includes 15 m radar cable. Made for Extremes The radar has been designed for use in winds of up to 100 knots and can therefore withstand the most extreme weather conditions. Meets the commercial grade IEC 62388 standard for ship bourne radar. 360° Degrees of Awareness Fast 60 RPM rotational speed delivers accurate target tracking for reliable 360° situational awareness. Doppler and ARPA Target Tracking Integrated Doppler target tracking makes it easy to interpret dangerous and safe targets. ARPA technology additionally enables professional target tracking of up to 50 targets with the same advanced ARPA technology. . RangeFusion Technology RangeFusion technology combines short and long pulses to quickly and clearly identify and display both close range and distant targets in a single high-resolution radar image that is quick and easy to interpret. Designed with Fishing Intelligence The Cyclone Pro is performance tuned for locating sea birds. This means gain and tune settings are intelligently optimised for imaging distant sea birds. Low Profile and Adaptable Installation Options Standing at just 335 mm, the radar features an impressively low profile. Furthermore, the antenna base has a built-in cable gland that neatly conceals all cable connections. Technical data Power supply 10.2 - 31.2 V DC Power consumption 95 W (typical) 195 W (max.) Operating temperature range -25 to +55 °C Antenna size 91 cm Output power 110 W Max. range 96 nm Rotation speed 12 / 24 / 36 / 48 / 60 RPM Beam width (vertical) 25° Beam width (horizontal) 2.83° Boot up time 40 seconds Transmitter frequency 9370 / 9400 / 9430 MHz (selectable) Receiver characteristic Linear Receiver noise Less than 5 dB Data connection 1x Raynet connector Waterproof IPX6 Max. wind speed 100 kts Dimensions Length: 1031 mm Pedestal: 388 x 360 x 335 Weight: 23 kg Included Open array radar, VCM100, 15 m power cable, 15 m data cable and mounting material Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Doppler mode (M)ARPA

SIMRAD

The HALO20 Pulse Compression Radar from SIMRAD helps you to increase situational awareness and reduce the risk of collisions by reliably detecting and displaying hazards and other targets within a radius of up to 24 nautical miles. Thanks to its compact housing and excellent price/performance ratio, this radar is the perfect solution for price-conscious buyers. Main features at a glance Lightweight and compact dome Achieves a range of up to 24 nautical miles Advanced Pulse Compression Technology Easy to operate MARPA target tracking (up to 10 targets) Can be used instantly from standby Guard zones Supplied with 10 m radar cable and 1.5 m RJ45 to Ethernet adapter cable Compatible with LOWRANCE SIMRAD B & G HDS Gen3 GO9 / 12 XSE Vulcan R HDS carbon GO7 XSR Zeus² HDS live NSS evo2 Zeus³ Elite FS NSS evo3 Zeus² GH NSO evo2 Zeus³ GH NSO evo3 Pulse compression radars in comparison HALO 20 HALO 20+ HALO 24 Max. range 24 m² 36 m² 48 m² Rotation 24 rpm 20-60 rpm 20-60 rpm Dual range No Yes Yes Velocity track (target colouring) No Yes Yes Beam sharpening No Yes Yes Sector blanking Yes Yes Yes LED lighting No Yes Yes MARPA targets Yes (10) Yes (20) Yes (20) Technical specifications Voltage 9 - 31.2 V DC Power consumption 17 - 20 W @ 13.8 V Power consumption (standby) 3.9 W Temperature range -25 to + 55° C Waterproof IPX6 Dimensions Ø 510 mm x H 223 mm Max. relative wind speed 51 m / sec (100 knots) Range 100 m to 24 sm Minimum range 6 m Rotation 20 - 24 rpm Transmitter peak power 10 W Refresh rate 700 - 2400 Hz Bandwidth Max. 48 MHz Data cable Ethernet Max. length of the data cable 30 m Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. (M)ARPA

B&G

​The HALO20 Pulse Compression Radar from B&G helps you to increase situational awareness and reduce the risk of collisions by reliably detecting and displaying hazards and other targets within a radius of up to 24 nautical miles. Thanks to its compact housing and excellent price/performance ratio, this radar is the perfect solution for price-conscious buyers. Main features at a glance Lightweight and compact dome Achieves a range of up to 24 nautical miles Advanced Pulse Compression Technology Easy to operate MARPA target tracking (up to 10 targets) Can be used instantly from standby Guard zones Supplied with 20 m radar cable and 1.5 m RJ45 to Ethernet adapter cable Compatible with LOWRANCE SIMRAD B & G HDS Gen3 GO9 / 12 XSE Vulcan R HDS carbon GO7 XSR Zeus² HDS live NSS evo2 Zeus³ Elite FS NSS evo3 Zeus² GH NSO evo2 Zeus³ GH NSO evo3 Pulse compression radars in comparison HALO 20 HALO 20+ HALO 24 Max. range 24 sm 36 sm 48 sm Rotation 24 rpm 20-60 rpm 20-60 rpm Dual range No Yes Yes Velocity track No Yes Yes Beam sharpening No Yes Yes Sector blanking Yes Yes Yes LED lighting No Yes Yes MARPA targets Yes (10) Yes (20) Yes (20) Technical specifications Voltage 9 - 31.2 V DC Power consumption 17 - 20 W @ 13.8 V Power consumption (standby) 3.9 W Temperature range -25 to + 55° C Waterproof IPX6 Dimensions Ø 510 mm x H 223 mm Max. relative wind speed 51 m / sec (100 knots) Range 100 m to 24 sm Minimum range 6 m Rotation 20 - 24 rpm Transmitter peak power 10 W Refresh rate 700 - 2400 Hz Bandwidth Max. 48 MHz Data cable Ethernet Max. length of the data cable 30 m Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. (M)ARPA

SIMRAD

The HALO20+ Pulse Compression radar from SIMRAD uses innovative VelocityTrack™ Doppler technology to instantly identify hazards at short and long distances. Thanks to its unbeatable rotation of up to 60 rpm, the 20" radar antenna offers a near real-time view for the best possible collision avoidance. The ultimate view for collision avoidance The HALO20 radar antenna delivers a full 360° sweep every second thanks to its maximum output of up to 60 rpm. These near real-time updates give you the ultimate view so that you can quickly and proactively avoid possible collisions. The Halo radar further convinces with crystal-clear images, which simplify navigation even in poor visibility and densely populated waterways. VelocityTrack ™ Doppler technology built in Improve situational awareness and reduce collision risk with VelocityTrack™ Doppler technology, giving instant, visual feedback on whether targets are coming towards you or going away. There's no need to manually select individual targets. The Doppler radar automatically checks every target in range. Possible dangers are marked accordingly in colour. Main features at a glance 36 nm range Compact 20 "dome with integrated LED lights Advanced pulse compression technology with beam sharpening Dual Range operation detects dangers both near and far Ultra-fast 60 rpm operation with ranges of up to 2 nm VelocityTrack™ Doppler technology for optimal collision avoidance Easy to use with harbour, offshore, weather and bird modes MARPA target tracking (up to 10 targets, 20 in dual range). Can be used instantly from standby Supplied with 10 m radar cable and 1.5 m RJ45 to Ethernet adapter cable Compatible with LOWRANCE SIMRAD B & G HDS Gen3 GO9 / 12 XSE Vulcan HDS carbon GO7 XSR Zeus² HDS live NSS evo2 Zeus³ Elite FS NSS evo3 Zeus² GH NSO evo2 Zeus³ GH NSO evo3 Pulse compression radars in comparison HALO 20 HALO 20+ HALO 24 Max. range 24 m² 36 m² 48 m² Rotation 24 rpm 20-60 rpm 20-60 rpm Dual range No Yes Yes Velocity track (target colouring) No Yes Yes Beam sharpening No Yes Yes Sector Blanking Yes Yes Yes LED lighting No Yes Yes MARPA targets Yes (10) Yes (20) Yes (20) Technical specifications Voltage 9 - 31.2 V DC Power consumption 17-29 W @ 13.8 V Power consumption (standby) 3.9 W Temperature range -25 to + 55 ° C Waterproof IPX6 Dimensions Ø 510 mm x H 223 mm Max. relative wind speed 51 m / sec (100 knots) Range 100 m to 36 sm Minimum range 6 m Rotation 20 - 60 rpm Transmitter peak power 25 W Refresh rate 700 - 2400 Hz Bandwidth Max. 48 MHz Data cable Ethernet Max. length of the data cable 30 m Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Doppler mode (M)ARPA

B&G

The HALO20+ Pulse Compression radar from B&G uses innovative VelocityTrack™ Doppler technology to instantly identify hazards at short and long distances. Thanks to its unbeatable rotation of up to 60 rpm, the 20" radar antenna offers a near real-time view for the best possible collision avoidance. The ultimate view for collision avoidance The HALO20 radar antenna delivers a full 360° sweep every second thanks to its maximum output of up to 60 rpm. These near real-time updates give you the ultimate view so that you can quickly and proactively avoid possible collisions. The Halo radar further convinces with crystal-clear images, which simplify navigation even in poor visibility and densely populated waterways. VelocityTrack ™ Doppler technology built in Improve situational awareness and reduce collision risk with VelocityTrack™ Doppler technology, giving instant, visual feedback on whether targets are coming towards you or going away. There's no need to manually select individual targets. The Doppler radar automatically checks every target in range. Possible dangers are marked accordingly in colour. Main features at a glance 36 nm range Compact 20 "dome with integrated LED lights Advanced pulse compression technology with beam sharpening Dual Range operation detects dangers both near and far Ultra-fast 60 rpm operation with ranges of up to 2 nm VelocityTrack™ Doppler technology for optimal collision avoidance Easy to use with harbour, offshore, weather and bird modes MARPA target tracking (up to 10 targets, 20 in dual range). Can be used instantly from standby Supplied with 20 m radar cable and 1.5 m RJ45 to Ethernet adapter cable Compatible with LOWRANCE SIMRAD B & G HDS Gen3 GO9 / 12 XSE Vulcan HDS carbon GO7 XSR Zeus² HDS live NSS evo2 Zeus³ Elite FS NSS evo3 Zeus² GH NSO evo2 Zeus³ GH NSO evo3 Pulse compression radars in comparison HALO 20 HALO 20+ HALO 24 Max. range 24 m² 36 m² 48 m² Rotation 24 rpm 20-60 rpm 20-60 rpm Dual range No Yes Yes Velocity Track (target colouring) No Yes Yes Beam sharpening No Yes Yes Sector Blanking Yes Yes Yes LED lighting No Yes Yes MARPA targets Yes (10) Yes (20) Yes (20) Technical specifications Voltage 9 - 31.2 V DC Power consumption 17-29 W @ 13.8 V Power consumption (standby) 3.9 W Temperature range -25 to + 55 ° C Waterproof IPX6 Dimensions Ø 510 mm x H 223 mm Max. relative wind speed 51 m / sec (100 knots) Range 100 m to 36 sm Minimum range 6 m Rotation 20 - 60 rpm Transmitter peak power 25 W Refresh rate 700 - 2400 Hz Bandwidth Max. 48 MHz Data cable Ethernet Max. length of the data cable 30 m Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Doppler mode (M)ARPA

SIMRAD

SIMRAD's HALO24 Pulse Compression radar uses innovative VelocityTrack Doppler technology to instantly identify hazards at short and long ranges. Featuring an unbeatable rotation rate of up to 60 rpm, the 24" radar antenna provides near-real-time viewing and optimal visibility for ultimate collision avoidance. The ultimate view for collision avoidance The HALO24 radar antenna is incredibly powerful, providing up to 60 rpm of rotation, giving full 360° scanning every second. With these near real-time updates, it gives you the ultimate view and the ability to quickly anticipate possible collisions. In addition, the Halo radar provides crystal clear images that make navigation easier even in poor visibility and densely populated waterways. VelocityTrack ™ Integrated Doppler Technology Improve situational awareness and reduce the risk of collision with VelocityTrack Doppler technology! This feature gives you instant visual feedback on whether targets are approaching or moving away. You no longer have to manually select individual targets. The Doppler effect automatically and instantly checks every target seen by your radar. Potential hazards are accordingly highlighted in colour. Main features at a glance 48 sm range Compact 24 "dome with integrated LED lights Advanced pulse compression technology with beam sharpening Dual Range operation detects dangers both near and far Ultra-fast 60 rpm operation with ranges of up to 2 nm VelocityTrack ™ Doppler technology provides optimal collision avoidance Easy to use with harbor, offshore, weather and bird MARPA target tracking (up to 10 targets, 20 in double range). Even from standby, the radar can be used immediately Pulse compression radars in comparison HALO 20 HALO 20+ HALO 24 Max. range 24 m² 36 m² 48 m² Rotation 24 rpm 20-60 rpm 20-60 rpm Dual range No Yes Yes Velocity Track (target colouring) No Yes Yes Beam sharpening No Yes Yes Sector blanking Yes Yes Yes LED lighting No Yes Yes MARPA targets Yes (10) Yes (20) Yes (20) Technical specifications Voltage 9 - 31.2 V DC Power consumption 14.5 - 27 W at 13.8 V DC Power consumption (standby) 3.9 W at 13.8 V DC Temperature range -25 ° to + 55 ° C Waterproof standard IPX6 Dimensions Ø 610 mm x H 225 mm Max. relative wind speed 51 m / sec (100 knots) Range 100 m to 48 sm Minimum range 6 m RPM 20 - 60 rpm Transmitter max power 25 W Refresh rate 700 - 2400 Hz Bandwidth Max. 48 MHz Data cable Ethernet Max. length of the data cable 30 m Compatible with NSS evo2, NSS evo3, NSO evo3, GO7 (with radar conection), GO9, GO12 Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Doppler mode (M)ARPA

B&G

B&G's HALO24 Pulse Compression Radar uses innovative VelocityTrack Doppler technology to instantly identify hazards at short and long ranges. Featuring an unbeatable rotation rate of up to 60 rpm, the 24" radar antenna provides near-real-time viewing and optimal visibility for ultimate collision avoidance. The ultimate view for collision avoidance The HALO24 radar antenna is incredibly powerful, providing up to 60 rpm of rotation, giving full 360° scanning every second. With these near real-time updates, it gives you the ultimate view and the ability to quickly anticipate possible collisions. In addition, the Halo radar provides crystal clear images that make navigation easier even in poor visibility and densely populated waterways. VelocityTrack ™ Integrated Doppler Technology Improve situational awareness and reduce the risk of collision with VelocityTrack Doppler technology! This feature gives you instant visual feedback on whether targets are approaching or moving away. You no longer have to manually select individual targets. The Doppler effect automatically and instantly checks every target seen by your radar. Potential hazards are accordingly highlighted in colour. Main features at a glance 48 sm range Compact 24 "dome with integrated LED lights Advanced pulse compression technology with beam sharpening Dual Range operation detects dangers both near and far Ultra-fast 60 rpm operation with ranges of up to 2 nm VelocityTrack ™ Doppler technology provides optimal collision avoidance Easy to use with harbor, offshore, weather and bird MARPA target tracking (up to 10 targets, 20 in double range). Even from standby, the radar can be used immediately Pulse compression radars in comparison HALO 20 HALO 20+ HALO 24 Max. range 24 sm 36 sm 48 sm Rotation 24 rpm 20-60 rpm 20-60 rpm Dual range No Yes Yes Velocity Track (target colouring) No Yes Yes Beam sharpening No Yes Yes Sector blanking Yes Yes Yes LED lighting No Yes Yes MARPA targets Yes (10) Yes (20) Yes (20) Technical specifications Voltage 9 - 31.2 V DC Power consumption 14.5 - 27 W at 13.8 V DC Power consumption (standby) 3.9 W at 13.8 V DC Temperature range -25 ° to + 55 ° C Waterproof standard IPX6 Dimensions Ø 610 mm x H 225 mm Max. relative wind speed 51 m / sec (100 knots) Range 100 m to 48 sm Minimum range 6 m RPM 20 - 60 rpm Transmitter max power 25 W Refresh rate 700 - 2400 Hz Bandwidth Max. 48 MHz Data cable Ethernet Max. length of the data cable 30 m Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Doppler mode (M)ARPA

RAYMARINE

Unbeatable performance and great range! The rugged, high performance Magnum series open slot radars use familiar radar technology and offer enhanced target tracking and reliable performance - all packaged in a new design. Includes 15m radar cable. Key Features Magnum is available in a 4kW power output version, with a four-foot antenna array. It offers a maximum range up to 72nm, ideal for blue water vessels. The perfect companion to Raymarine’s award-winning Axiom® and Axiom Pro multifunction navigation displays (MFD) running LightHouse 3, Magnum is also backwards compatible with legacy models (see below). Superior Bird Mode The Magnum slot radar impresses with exceptional bird identification technology! Magnum’s Bird Mode feature has been further advanced to target birds with greater clarity up to 10nm, thus providing a better overview. Enhanced Radar Imaging Magnum radar also features Raymarine beam sharpening technology, delivering better than 1-degree bearing resolution for more detailed target separation, map-like coastal detail, and superior long-range performance. Best in Class Target Tracking The built in, fully automatic MARPA target acquisition and tracking delivers better situational awareness. Magnum also makes use of Raymarine’s Evolution 9-axis heading sensor technology to deliver real-time, accurate target plots. True Trails Magnum features True Trails target history. The True Trails features enables you to see a historical “wake” behind every moving contact. This additional information makes it even easier to interpret the motion of other vessels and make smart maneuvering decisions to pass safely. Real Time Heading Updates Connect Magnum with Axiom and LightHouse 3 and experience uninterrupted radar target imagery when making course changes. Real Time Heading updates allow the radar position display to rotate freely as-needed, without the need to refresh the entire display. Technical specifications Model 4 kW - 48 "SHD Color slot heater with 15 m RayNet radar cable Maximum Range Scale 72 nautical miles Weight (Pedestal + Antenna) 26 kg Beam Width Horizontal (Nominal) 1.85 ° Effective Horziontal Beam Width ((After Antenna Boost Beam Reduction) Less than 1 ° Beam Width Vertical -3dB 25 ° Rotation Rate 24rpm / 48rpm Receiver Bandwidth Customized digital filters for each pulse length Voltage 10.8 - 32 V DC Power Consumption <70 W (send) <30 W (standby) <1.2 W (rest) Maximum Automatic and Manual MARPA Targets (with Heading Sensor) 25 Real-Time Heading Refresh (with Heading Sensor) Yes True Trails (with Heading Sensor) Yes Operating Temperature Range -10 ° C to + 55 ° C Waterproofing Standard IPX6 Scanner Cable Length 15 m standard Compatibility list Axiom / Axiom Pro (LH3.4 or higher) Compatible with full feature set eS series / gS series (LH3.4 or higher) Compatible with limited feature set. No automatic MARPA Series a / c / e / eS / gS (LH2 v19.03) Compatible with limited feature set. No Real-Time Heading. No True Trails. No automatic MARPA E-Wide (v2.65) Compatible with limited feature set. No Real-Time Heading. No True Trails. No automatic MARPA C-Wide (v2.35) Compatible with limited feature set. No Real-Time Heading. No True Trails. No automatic MARPA. No Bird Mode G series (v4.66) Compatible with limited feature set. No Real-Time Heading. No True Trails. No automatic MARPA E-Classic (v5.69) Compatible with limited feature set. No Real-Time Heading. No True Trails. No automatic MARPA. No Bird Mode Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. (M)ARPA

RAYMARINE

Raymarine - QUANTUM 2 Raymarine's QUANTUM 2 CHIRP pulse compression radar with doppler target identification technology provides you with extra safety on both long and short distances. Due to the special processing of Doppler radar data, it is possible to display moving targets in color on the display. Easily Identify Dangerous Targets Raymarine Quantum 2 Doppler target processing readily identifies and color codes moving radar contacts for instant recognition and reduced risk of collision. Superior Collision Avoidance Quantum 2 MARPA mode provides an effective means of dangerous target tracking. Raymarine MARPA target tracking is the same technology trusted by the United States Coast Guard. Key Features: Doppler moving target display allows for superior situational awareness at-a-glance Fully automatic ARPA target tracking, along with manual MARPA mode Adjustable TrueTrails target history shows the motion history of moving contacts CHIRP Pulse Compression detects contacts as close as 18-feet for zero-visibility navigation 24-mile range for early detection of traffic, navigation aids, landfall and weather Immediate awareness – Quantum starts up and is ready to go in seconds Superior interference rejection eliminates noise from other radars Simplified installation with Wi-Fi or thin wire network connectivity Easy upgrade – Quantum 2 fits the same bolt pattern as other Raymarine scanners Lightweight and easy to install – Quantum weighs up to 50% less than comparable magnetron radars Safe emissions – mount Quantum anywhere onboard Low power consumption for extended battery life under sail How Doppler Radar Works? Microwave energy waves are bounced off of a distant target, just like conventional radar. Moving targets send back echoes whose frequencies shift upward or downward from what was originally transmitted. For inbound targets, the frequency increases as the leading edge of the returning echoes are received more frequently as the target’s range decreases. For outbound targets, the frequency drops as the returning echoes spread out as its range increases. Doppler radars are engineered to detect these small shifts in wave frequency, and use them to classify moving radar targets. Doppler radar is tuned specifically to detect the radar echo frequency shift returned by moving vs. stationary targets. Quantum 2 then uniquely color codes moving targets to indicate whether they are getting closer, or moving away. Inbound targets are colored red. Outbound targets are colored green. Color coded targets make it simple to pick out moving traffic from other stationary targets like land, navigation aids or stopped/anchored vessels. Fully Automatic Target Acquisition and Tracking The Quantum 2 also features fully automatic target acquisition and tracking. Configure custom safety or alarm zones and be alerted to new radar contacts entering the zone. Quantum 2 can begin tracking those contacts automatically, calculating their course, speed, closest point of approach and more. You’ll be alerted to dangerous contacts with audible alerts and easy to understand on-screen graphics. Quantum 2 also features Raymarine’s new True Trails target history display. The True Trails features enables you to see a historical “wake” behind every moving contact. This additional information makes it even easier to interpret the motion of other vessels, and make smart maneuvering decisions to pass safely. Like every Raymarine Quantum system, you’ll also benefit from a rugged and lightweight design that is super-easy to install. Quantum 2 has very low power consumption making it especially friendly to vessels running exclusively on battery power. Quantum 2 with Doppler can be installed in a traditional wired configuration, or use its built-in Wi-Fi technology to connect it to your Raymarine MFD. Technical Specifications General Specifications Dimensions: diameter x height 541.0 mm x 209.5 mm Weight: 5.6 kg Supply voltage: Either 12 V or 24 V DC nominal Minimum: 10.8 V DC | Maximum: 31.2 V DC Power consumption: Transmit mode (maximum): 17 W | Standby mode: 7 W | Sleep mode (applies only to radars connected via Wi-Fi): 2W Waterproofing: IPX6 Operating temperature range: -10° C to +55°C Storage temperature range: -25°C to +70°C Additional storage conditions: Store upright; do not block vents on underside Humidity: Up to 95% at 35°C Maximum wind speed: 100 kts Transmitter Type: X-band solid-state transmitter with pulse compression technology Transmit frequency: 9354 MHz to 9446 MHz Peak power output: 20 W Duplexer: Circulator Pulse widths (3 dB): 4 ns to 14.7 Chirp bandwidth: Chirp lengths: 40 ns to pulse repetition frequency: 2083 Hz Chirp bandwidth: Up to 32 MHz Standby mode Scanner rotation - OFF | Scanner transmission - OFF | Wi-Fi link - ON Antenna Type: Patch array Beamwidth (nominal): Horizontal: 4.9 ° | Vertical: 20 ° Polarization Horizontal Rotation speed 24 rpm nominal Doubler Traget Tracking Tracking of 10 simultaneous MARPA and / or ARPA targets (with Doppler-assisted ARPA) Target Filtering: True Motion mode identifies only those objects that are moving relative to the vessel Compatibility Raymarine AXIOM series (starting with Lighthouse version 3) Raymarine AXIOM Pro Series (starting with Lighthouse version 3) Raymarine eS series (starting with Lighthouse version 3) Raymarine gS series (starting with Lighthouse version 3) Delivery without multifunction display! Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Doppler mode WiFi (M)ARPA

RAYMARINE

Raymarine - QUANTUM 2 Raymarine's QUANTUM 2 CHIRP pulse compression radar with doppler target identification technology provides you with extra safety on both long and short distances. Due to the special processing of Doppler radar data, it is possible to display moving targets in color on the display. Easily Identify Dangerous Targets Raymarine Quantum 2 Doppler target processing readily identifies and color codes moving radar contacts for instant recognition and reduced risk of collision. Superior Collision Avoidance Quantum 2 MARPA mode provides an effective means of dangerous target tracking. Raymarine MARPA target tracking is the same technology trusted by the United States Coast Guard. Key Features: Doppler moving target display allows for superior situational awareness at-a-glance Fully automatic ARPA target tracking, along with manual MARPA mode Adjustable TrueTrails target history shows the motion history of moving contacts CHIRP Pulse Compression detects contacts as close as 18-feet for zero-visibility navigation 24-mile range for early detection of traffic, navigation aids, landfall and weather Immediate awareness – Quantum starts up and is ready to go in seconds Superior interference rejection eliminates noise from other radars Simplified installation with Wi-Fi or thin wire network connectivity Easy upgrade – Quantum 2 fits the same bolt pattern as other Raymarine scanners Lightweight and easy to install – Quantum weighs up to 50% less than comparable magnetron radars Safe emissions – mount Quantum anywhere onboard Low power consumption for extended battery life under sail How Doppler Radar Works? Microwave energy waves are bounced off of a distant target, just like conventional radar. Moving targets send back echoes whose frequencies shift upward or downward from what was originally transmitted. For inbound targets, the frequency increases as the leading edge of the returning echoes are received more frequently as the target’s range decreases. For outbound targets, the frequency drops as the returning echoes spread out as its range increases. Doppler radars are engineered to detect these small shifts in wave frequency, and use them to classify moving radar targets. Doppler radar is tuned specifically to detect the radar echo frequency shift returned by moving vs. stationary targets. Quantum 2 then uniquely color codes moving targets to indicate whether they are getting closer, or moving away. Inbound targets are colored red. Outbound targets are colored green. Color coded targets make it simple to pick out moving traffic from other stationary targets like land, navigation aids or stopped/anchored vessels. Fully Automatic Target Acquisition and Tracking The Quantum 2 also features fully automatic target acquisition and tracking. Configure custom safety or alarm zones and be alerted to new radar contacts entering the zone. Quantum 2 can begin tracking those contacts automatically, calculating their course, speed, closest point of approach and more. You’ll be alerted to dangerous contacts with audible alerts and easy to understand on-screen graphics. Quantum 2 also features Raymarine’s new True Trails target history display. The True Trails features enables you to see a historical “wake” behind every moving contact. This additional information makes it even easier to interpret the motion of other vessels, and make smart maneuvering decisions to pass safely. Like every Raymarine Quantum system, you’ll also benefit from a rugged and lightweight design that is super-easy to install. Quantum 2 has very low power consumption making it especially friendly to vessels running exclusively on battery power. Quantum 2 with Doppler can be installed in a traditional wired configuration, or use its built-in Wi-Fi technology to connect it to your Raymarine MFD. Technical Specifications General Specifications Dimensions: diameter x height 541.0 mm x 209.5 mm Weight: 5.6 kg Supply voltage: Either 12 V or 24 V DC nominal Minimum: 10.8 V DC | Maximum: 31.2 V DC Power consumption: Transmit mode (maximum): 17 W | Standby mode: 7 W | Sleep mode (applies only to radars connected via Wi-Fi): 2W Waterproofing: IPX6 Operating temperature range: -10° C to +55°C Storage temperature range: -25°C to +70°C Additional storage conditions: Store upright; do not block vents on underside Humidity: Up to 95% at 35°C Maximum wind speed: 100 kts Transmitter Type: X-band solid-state transmitter with pulse compression technology Transmit frequency: 9354 MHz to 9446 MHz Peak power output: 20 W Duplexer: Circulator Pulse widths (3 dB): 4 ns to 14.7 Chirp bandwidth: Chirp lengths: 40 ns to pulse repetition frequency: 2083 Hz Chirp bandwidth: Up to 32 MHz Standby mode Scanner rotation - OFF | Scanner transmission - OFF | Wi-Fi link - ON Antenna Type: Patch array Beamwidth (nominal): Horizontal: 4.9 ° | Vertical: 20 ° Polarization Horizontal Rotation speed 24 rpm nominal Doubler Traget Tracking Tracking of 10 simultaneous MARPA and / or ARPA targets (with Doppler-assisted ARPA) Target Filtering: True Motion mode identifies only those objects that are moving relative to the vessel Compatibility Raymarine AXIOM series (starting with Lighthouse version 3) Raymarine AXIOM Pro Series (starting with Lighthouse version 3) Raymarine eS series (starting with Lighthouse version 3) Raymarine gS series (starting with Lighthouse version 3) Delivery without multifunction display! Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Doppler mode WiFi (M)ARPA

RAYMARINE

Raymarine - QUANTUM 2 Raymarine's QUANTUM 2 CHIRP pulse compression radar with doppler target identification technology provides you with extra safety on both long and short distances. Due to the special processing of Doppler radar data, it is possible to display moving targets in color on the display. Easily Identify Dangerous Targets Raymarine Quantum 2 Doppler target processing readily identifies and color codes moving radar contacts for instant recognition and reduced risk of collision. Superior Collision Avoidance Quantum 2 MARPA mode provides an effective means of dangerous target tracking. Raymarine MARPA target tracking is the same technology trusted by the United States Coast Guard. Key Features: Doppler moving target display allows for superior situational awareness at-a-glance Fully automatic ARPA target tracking, along with manual MARPA mode Adjustable TrueTrails target history shows the motion history of moving contacts CHIRP Pulse Compression detects contacts as close as 18-feet for zero-visibility navigation 24-mile range for early detection of traffic, navigation aids, landfall and weather Immediate awareness – Quantum starts up and is ready to go in seconds Superior interference rejection eliminates noise from other radars Simplified installation with Wi-Fi or thin wire network connectivity Easy upgrade – Quantum 2 fits the same bolt pattern as other Raymarine scanners Lightweight and easy to install – Quantum weighs up to 50% less than comparable magnetron radars Safe emissions – mount Quantum anywhere onboard Low power consumption for extended battery life under sail How Doppler Radar Works? Microwave energy waves are bounced off of a distant target, just like conventional radar. Moving targets send back echoes whose frequencies shift upward or downward from what was originally transmitted. For inbound targets, the frequency increases as the leading edge of the returning echoes are received more frequently as the target’s range decreases. For outbound targets, the frequency drops as the returning echoes spread out as its range increases. Doppler radars are engineered to detect these small shifts in wave frequency, and use them to classify moving radar targets. Doppler radar is tuned specifically to detect the radar echo frequency shift returned by moving vs. stationary targets. Quantum 2 then uniquely color codes moving targets to indicate whether they are getting closer, or moving away. Inbound targets are colored red. Outbound targets are colored green. Color coded targets make it simple to pick out moving traffic from other stationary targets like land, navigation aids or stopped/anchored vessels. Fully Automatic Target Acquisition and Tracking The Quantum 2 also features fully automatic target acquisition and tracking. Configure custom safety or alarm zones and be alerted to new radar contacts entering the zone. Quantum 2 can begin tracking those contacts automatically, calculating their course, speed, closest point of approach and more. You’ll be alerted to dangerous contacts with audible alerts and easy to understand on-screen graphics. Quantum 2 also features Raymarine’s new True Trails target history display. The True Trails features enables you to see a historical “wake” behind every moving contact. This additional information makes it even easier to interpret the motion of other vessels, and make smart maneuvering decisions to pass safely. Like every Raymarine Quantum system, you’ll also benefit from a rugged and lightweight design that is super-easy to install. Quantum 2 has very low power consumption making it especially friendly to vessels running exclusively on battery power. Quantum 2 with Doppler can be installed in a traditional wired configuration, or use its built-in Wi-Fi technology to connect it to your Raymarine MFD. Technical Specifications General Specifications Dimensions: diameter x height 541.0 mm x 209.5 mm Weight: 5.6 kg Supply voltage: Either 12 V or 24 V DC nominal Minimum: 10.8 V DC | Maximum: 31.2 V DC Power consumption: Transmit mode (maximum): 17 W | Standby mode: 7 W | Sleep mode (applies only to radars connected via Wi-Fi): 2W Waterproofing: IPX6 Operating temperature range: -10° C to +55°C Storage temperature range: -25°C to +70°C Additional storage conditions: Store upright; do not block vents on underside Humidity: Up to 95% at 35°C Maximum wind speed: 100 kts Transmitter Type: X-band solid-state transmitter with pulse compression technology Transmit frequency: 9354 MHz to 9446 MHz Peak power output: 20 W Duplexer: Circulator Pulse widths (3 dB): 4 ns to 14.7 Chirp bandwidth: Chirp lengths: 40 ns to pulse repetition frequency: 2083 Hz Chirp bandwidth: Up to 32 MHz Standby mode Scanner rotation - OFF | Scanner transmission - OFF | Wi-Fi link - ON Antenna Type: Patch array Beamwidth (nominal): Horizontal: 4.9 ° | Vertical: 20 ° Polarization Horizontal Rotation speed 24 rpm nominal Doubler Traget Tracking Tracking of 10 simultaneous MARPA and / or ARPA targets (with Doppler-assisted ARPA) Target Filtering: True Motion mode identifies only those objects that are moving relative to the vessel Compatibility Raymarine AXIOM series (starting with Lighthouse version 3) Raymarine AXIOM Pro Series (starting with Lighthouse version 3) Raymarine eS series (starting with Lighthouse version 3) Raymarine gS series (starting with Lighthouse version 3) Delivery without multifunction display!

RAYMARINE

Raymarine - QUANTUM 2 Raymarine's QUANTUM 2 CHIRP pulse compression radar with doppler target identification technology provides you with extra safety on both long and short distances. Due to the special processing of Doppler radar data, it is possible to display moving targets in color on the display. Easily Identify Dangerous Targets Raymarine Quantum 2 Doppler target processing readily identifies and color codes moving radar contacts for instant recognition and reduced risk of collision. Superior Collision Avoidance Quantum 2 MARPA mode provides an effective means of dangerous target tracking. Raymarine MARPA target tracking is the same technology trusted by the United States Coast Guard. Key Features: Doppler moving target display allows for superior situational awareness at-a-glance Fully automatic ARPA target tracking, along with manual MARPA mode Adjustable TrueTrails target history shows the motion history of moving contacts CHIRP Pulse Compression detects contacts as close as 18-feet for zero-visibility navigation 24-mile range for early detection of traffic, navigation aids, landfall and weather Immediate awareness – Quantum starts up and is ready to go in seconds Superior interference rejection eliminates noise from other radars Simplified installation with Wi-Fi or thin wire network connectivity Easy upgrade – Quantum 2 fits the same bolt pattern as other Raymarine scanners Lightweight and easy to install – Quantum weighs up to 50% less than comparable magnetron radars Safe emissions – mount Quantum anywhere onboard Low power consumption for extended battery life under sail How Doppler Radar Works? Microwave energy waves are bounced off of a distant target, just like conventional radar. Moving targets send back echoes whose frequencies shift upward or downward from what was originally transmitted. For inbound targets, the frequency increases as the leading edge of the returning echoes are received more frequently as the target’s range decreases. For outbound targets, the frequency drops as the returning echoes spread out as its range increases. Doppler radars are engineered to detect these small shifts in wave frequency, and use them to classify moving radar targets. Doppler radar is tuned specifically to detect the radar echo frequency shift returned by moving vs. stationary targets. Quantum 2 then uniquely color codes moving targets to indicate whether they are getting closer, or moving away. Inbound targets are colored red. Outbound targets are colored green. Color coded targets make it simple to pick out moving traffic from other stationary targets like land, navigation aids or stopped/anchored vessels. Fully Automatic Target Acquisition and Tracking The Quantum 2 also features fully automatic target acquisition and tracking. Configure custom safety or alarm zones and be alerted to new radar contacts entering the zone. Quantum 2 can begin tracking those contacts automatically, calculating their course, speed, closest point of approach and more. You’ll be alerted to dangerous contacts with audible alerts and easy to understand on-screen graphics. Quantum 2 also features Raymarine’s new True Trails target history display. The True Trails features enables you to see a historical “wake” behind every moving contact. This additional information makes it even easier to interpret the motion of other vessels, and make smart maneuvering decisions to pass safely. Like every Raymarine Quantum system, you’ll also benefit from a rugged and lightweight design that is super-easy to install. Quantum 2 has very low power consumption making it especially friendly to vessels running exclusively on battery power. Quantum 2 with Doppler can be installed in a traditional wired configuration, or use its built-in Wi-Fi technology to connect it to your Raymarine MFD. Technical Specifications General Specifications Dimensions: diameter x height 541.0 mm x 209.5 mm Weight: 5.6 kg Supply voltage: Either 12 V or 24 V DC nominal Minimum: 10.8 V DC | Maximum: 31.2 V DC Power consumption: Transmit mode (maximum): 17 W | Standby mode: 7 W | Sleep mode (applies only to radars connected via Wi-Fi): 2W Waterproofing: IPX6 Operating temperature range: -10° C to +55°C Storage temperature range: -25°C to +70°C Additional storage conditions: Store upright; do not block vents on underside Humidity: Up to 95% at 35°C Maximum wind speed: 100 kts Transmitter Type: X-band solid-state transmitter with pulse compression technology Transmit frequency: 9354 MHz to 9446 MHz Peak power output: 20 W Duplexer: Circulator Pulse widths (3 dB): 4 ns to 14.7 Chirp bandwidth: Chirp lengths: 40 ns to pulse repetition frequency: 2083 Hz Chirp bandwidth: Up to 32 MHz Standby mode Scanner rotation - OFF | Scanner transmission - OFF | Wi-Fi link - ON Antenna Type: Patch array Beamwidth (nominal): Horizontal: 4.9 ° | Vertical: 20 ° Polarization Horizontal Rotation speed 24 rpm nominal Doubler Traget Tracking Tracking of 10 simultaneous MARPA and / or ARPA targets (with Doppler-assisted ARPA) Target Filtering: True Motion mode identifies only those objects that are moving relative to the vessel Compatibility Raymarine AXIOM series (starting with Lighthouse version 3) Raymarine AXIOM Pro Series (starting with Lighthouse version 3) Raymarine eS series (starting with Lighthouse version 3) Raymarine gS series (starting with Lighthouse version 3) Delivery without multifunction display! Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Doppler mode WiFi (M)ARPA

RAYMARINE

Raymarine - QUANTUM 2 Raymarine's QUANTUM 2 CHIRP pulse compression radar with doppler target identification technology provides you with extra safety on both long and short distances. Due to the special processing of Doppler radar data, it is possible to display moving targets in color on the display. Easily Identify Dangerous Targets Raymarine Quantum 2 Doppler target processing readily identifies and color codes moving radar contacts for instant recognition and reduced risk of collision. Superior Collision Avoidance Quantum 2 MARPA mode provides an effective means of dangerous target tracking. Raymarine MARPA target tracking is the same technology trusted by the United States Coast Guard. Key Features: Doppler moving target display allows for superior situational awareness at-a-glance Fully automatic ARPA target tracking, along with manual MARPA mode Adjustable TrueTrails target history shows the motion history of moving contacts CHIRP Pulse Compression detects contacts as close as 18-feet for zero-visibility navigation 24-mile range for early detection of traffic, navigation aids, landfall and weather Immediate awareness – Quantum starts up and is ready to go in seconds Superior interference rejection eliminates noise from other radars Simplified installation with Wi-Fi or thin wire network connectivity Easy upgrade – Quantum 2 fits the same bolt pattern as other Raymarine scanners Lightweight and easy to install – Quantum weighs up to 50% less than comparable magnetron radars Safe emissions – mount Quantum anywhere onboard Low power consumption for extended battery life under sail How Doppler Radar Works? Microwave energy waves are bounced off of a distant target, just like conventional radar. Moving targets send back echoes whose frequencies shift upward or downward from what was originally transmitted. For inbound targets, the frequency increases as the leading edge of the returning echoes are received more frequently as the target’s range decreases. For outbound targets, the frequency drops as the returning echoes spread out as its range increases. Doppler radars are engineered to detect these small shifts in wave frequency, and use them to classify moving radar targets. Doppler radar is tuned specifically to detect the radar echo frequency shift returned by moving vs. stationary targets. Quantum 2 then uniquely color codes moving targets to indicate whether they are getting closer, or moving away. Inbound targets are colored red. Outbound targets are colored green. Color coded targets make it simple to pick out moving traffic from other stationary targets like land, navigation aids or stopped/anchored vessels. Fully Automatic Target Acquisition and Tracking The Quantum 2 also features fully automatic target acquisition and tracking. Configure custom safety or alarm zones and be alerted to new radar contacts entering the zone. Quantum 2 can begin tracking those contacts automatically, calculating their course, speed, closest point of approach and more. You’ll be alerted to dangerous contacts with audible alerts and easy to understand on-screen graphics. Quantum 2 also features Raymarine’s new True Trails target history display. The True Trails features enables you to see a historical “wake” behind every moving contact. This additional information makes it even easier to interpret the motion of other vessels, and make smart maneuvering decisions to pass safely. Like every Raymarine Quantum system, you’ll also benefit from a rugged and lightweight design that is super-easy to install. Quantum 2 has very low power consumption making it especially friendly to vessels running exclusively on battery power. Quantum 2 with Doppler can be installed in a traditional wired configuration, or use its built-in Wi-Fi technology to connect it to your Raymarine MFD. Technical Specifications General Specifications Dimensions: diameter x height 541.0 mm x 209.5 mm Weight: 5.6 kg Supply voltage: Either 12 V or 24 V DC nominal Minimum: 10.8 V DC | Maximum: 31.2 V DC Power consumption: Transmit mode (maximum): 17 W | Standby mode: 7 W | Sleep mode (applies only to radars connected via Wi-Fi): 2W Waterproofing: IPX6 Operating temperature range: -10° C to +55°C Storage temperature range: -25°C to +70°C Additional storage conditions: Store upright; do not block vents on underside Humidity: Up to 95% at 35°C Maximum wind speed: 100 kts Transmitter Type: X-band solid-state transmitter with pulse compression technology Transmit frequency: 9354 MHz to 9446 MHz Peak power output: 20 W Duplexer: Circulator Pulse widths (3 dB): 4 ns to 14.7 Chirp bandwidth: Chirp lengths: 40 ns to pulse repetition frequency: 2083 Hz Chirp bandwidth: Up to 32 MHz Standby mode Scanner rotation - OFF | Scanner transmission - OFF | Wi-Fi link - ON Antenna Type: Patch array Beamwidth (nominal): Horizontal: 4.9 ° | Vertical: 20 ° Polarization Horizontal Rotation speed 24 rpm nominal Doubler Traget Tracking Tracking of 10 simultaneous MARPA and / or ARPA targets (with Doppler-assisted ARPA) Target Filtering: True Motion mode identifies only those objects that are moving relative to the vessel Compatibility Raymarine AXIOM series (starting with Lighthouse version 3) Raymarine AXIOM Pro Series (starting with Lighthouse version 3) Raymarine eS series (starting with Lighthouse version 3) Raymarine gS series (starting with Lighthouse version 3) Delivery without multifunction display!

RAYMARINE

Raymarine - QUANTUM 2 Raymarine's QUANTUM 2 CHIRP pulse compression radar with doppler target identification technology provides you with extra safety on both long and short distances. Due to the special processing of Doppler radar data, it is possible to display moving targets in color on the display. Easily Identify Dangerous Targets Raymarine Quantum 2 Doppler target processing readily identifies and color codes moving radar contacts for instant recognition and reduced risk of collision. Superior Collision Avoidance Quantum 2 MARPA mode provides an effective means of dangerous target tracking. Raymarine MARPA target tracking is the same technology trusted by the United States Coast Guard. Key Features: Doppler moving target display allows for superior situational awareness at-a-glance Fully automatic ARPA target tracking, along with manual MARPA mode Adjustable TrueTrails target history shows the motion history of moving contacts CHIRP Pulse Compression detects contacts as close as 18-feet for zero-visibility navigation 24-mile range for early detection of traffic, navigation aids, landfall and weather Immediate awareness – Quantum starts up and is ready to go in seconds Superior interference rejection eliminates noise from other radars Simplified installation with Wi-Fi or thin wire network connectivity Easy upgrade – Quantum 2 fits the same bolt pattern as other Raymarine scanners Lightweight and easy to install – Quantum weighs up to 50% less than comparable magnetron radars Safe emissions – mount Quantum anywhere onboard Low power consumption for extended battery life under sail How Doppler Radar Works? Microwave energy waves are bounced off of a distant target, just like conventional radar. Moving targets send back echoes whose frequencies shift upward or downward from what was originally transmitted. For inbound targets, the frequency increases as the leading edge of the returning echoes are received more frequently as the target’s range decreases. For outbound targets, the frequency drops as the returning echoes spread out as its range increases. Doppler radars are engineered to detect these small shifts in wave frequency, and use them to classify moving radar targets. Doppler radar is tuned specifically to detect the radar echo frequency shift returned by moving vs. stationary targets. Quantum 2 then uniquely color codes moving targets to indicate whether they are getting closer, or moving away. Inbound targets are colored red. Outbound targets are colored green. Color coded targets make it simple to pick out moving traffic from other stationary targets like land, navigation aids or stopped/anchored vessels. Fully Automatic Target Acquisition and Tracking The Quantum 2 also features fully automatic target acquisition and tracking. Configure custom safety or alarm zones and be alerted to new radar contacts entering the zone. Quantum 2 can begin tracking those contacts automatically, calculating their course, speed, closest point of approach and more. You’ll be alerted to dangerous contacts with audible alerts and easy to understand on-screen graphics. Quantum 2 also features Raymarine’s new True Trails target history display. The True Trails features enables you to see a historical “wake” behind every moving contact. This additional information makes it even easier to interpret the motion of other vessels, and make smart maneuvering decisions to pass safely. Like every Raymarine Quantum system, you’ll also benefit from a rugged and lightweight design that is super-easy to install. Quantum 2 has very low power consumption making it especially friendly to vessels running exclusively on battery power. Quantum 2 with Doppler can be installed in a traditional wired configuration, or use its built-in Wi-Fi technology to connect it to your Raymarine MFD. Technical Specifications General Specifications Dimensions: diameter x height 541.0 mm x 209.5 mm Weight: 5.6 kg Supply voltage: Either 12 V or 24 V DC nominal Minimum: 10.8 V DC | Maximum: 31.2 V DC Power consumption: Transmit mode (maximum): 17 W | Standby mode: 7 W | Sleep mode (applies only to radars connected via Wi-Fi): 2W Waterproofing: IPX6 Operating temperature range: -10° C to +55°C Storage temperature range: -25°C to +70°C Additional storage conditions: Store upright; do not block vents on underside Humidity: Up to 95% at 35°C Maximum wind speed: 100 kts Transmitter Type: X-band solid-state transmitter with pulse compression technology Transmit frequency: 9354 MHz to 9446 MHz Peak power output: 20 W Duplexer: Circulator Pulse widths (3 dB): 4 ns to 14.7 Chirp bandwidth: Chirp lengths: 40 ns to pulse repetition frequency: 2083 Hz Chirp bandwidth: Up to 32 MHz Standby mode Scanner rotation - OFF | Scanner transmission - OFF | Wi-Fi link - ON Antenna Type: Patch array Beamwidth (nominal): Horizontal: 4.9 ° | Vertical: 20 ° Polarization Horizontal Rotation speed 24 rpm nominal Doubler Traget Tracking Tracking of 10 simultaneous MARPA and / or ARPA targets (with Doppler-assisted ARPA) Target Filtering: True Motion mode identifies only those objects that are moving relative to the vessel Compatibility Raymarine AXIOM series (starting with Lighthouse version 3) Raymarine AXIOM Pro Series (starting with Lighthouse version 3) Raymarine eS series (starting with Lighthouse version 3) Raymarine gS series (starting with Lighthouse version 3) Delivery without multifunction display! Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. Doppler mode WiFi (M)ARPA

RAYMARINE

Raymarine Quantum Radar, by FLIR, is the next generation of marine radar featuring CHIRP pulse compression technology. Delivery includes 10 m power and data cable.

RAYMARINE

Raymarine Quantum Radar, by FLIR, is the next generation of marine radar featuring CHIRP pulse compression technology. Delivery includes 10 m power cable.

RAYMARINE

Raymarine Quantum Radar, by FLIR, is the next generation of marine radar featuring CHIRP pulse compression technology. Delivery includes 15 m power and data cable.

RAYMARINE

The HD digital radar antenna allows for the simultaneous display of two radar images with different display areas (Dual Range). This unit also has a high-speed mode, which is automatically activated when nearby fast targets are to be displayed.

RAYMARINE

The HD digital radar antenna allows for the simultaneous display of two radar images with different display areas (Dual Range). This unit also has a high-speed mode, which is automatically activated when nearby fast targets are to be displayed.