RAYMARINE

RV-212 bronze thru-hull transducer set for direct connection to your Raymarine AXIOM multifunction display. Lifelike clarity and perfectly recognizable structures with RealVision 3D Sonar. The set contains a pair of transducers, one for starboard and one for port side. The RV-212 thru-hull transducer is a 4-channel, broadband CHIRP transducer with Down- and SideVision and a high-frequency CHIRP fish-searching function. In addition, the sensor measures the water temperature and transmits the data to the AXIOM for display. Due to a built-in course/depth reference system (AHRS), which stabilizes the sonar images, you will always receive crisp images, even in more moderate swell. The thru-hull transducers are mounted through a hole in the fuselage with a supported deadrise of 6 - 18°. The RV-212 comes with a 2m Y-cable, an 8 meter extension cable and all mounting parts. Note: The transducers must always be installed as a set and connected to the terminal. The use of a single RV-212 transducer is not possible. RV-212 Features: Installation Through-hull installation Material Bronze Max. depth RealVision 3D: 90 m DownVision: 180 m Port/starboard: 90 m Cone: 275 m Frequencies RealVision & High CHIRP Fishfhinder Beam width (L/H) RealVision 3D: 180° DownVision: 60° Cone: 25° Supported lift 6-18° Data Depth and temperature Rec. Hull material Fibre glass / wood Cable Length 2m / 3ft Y-cable + extension cable 8m / 26ft Compatible with the following Raymarine chartplotters: Raymarine AXIOM+ RV Raymarine AXIOM RV Raymarine AXIOM2 Pro RVM Raymarine AXIOM Pro RVX

FURUNO

Original through-hull transducer for direct connection to the FURUNO GP-1971F and GP-1871F chart plotters. The transducer measures depth and water temperature. Power: 600 W. Frequency: 50/200 kHz. Installation diameter: 51 mm. Material: Plastic. Cable length: 10 m. Number of pins: 10.

AIRMAR

Your own personal weather service on board 24 hours a day. The Airmar 110WX weather station provides precise data on wind speed, wind angle, barometric pressure, air temperature and relative humidity. No moving parts for measurement of wind data for excellent reliability and performance. Encased in a durable, rugged housing that is IPX6 rated for protection against water-ingress and of the sensors. Note: An NMEA0183 or NMEA2000 data cable is required to operate the Airmar 110WX weather station. Data output via MEA0183 or NMEA2000, depending on cable. Technical data Weight: 275 g (0.6 lb.) Wind Speed: Range: 0 to 40 m/s Accuracy: 5% at 10 m/s at 4 angles Resolution: 0.1 m/s Calculations: User configurable damping Wind Direction: Range: 0° to 359.9° Accuracy: ±3° at 10 m/s Resolution: 0.1° Calculations: User configurable damping Air Temperature: Range: -40° to 80°C (-40 to 176°F) Accuracy: ±0.3°C at 20°C Resolution: 0.1°C Barometric Pressure: Range: 300 to 1100 hPa Accuracy: ±0.5 hPa at 25°C (or better) Resolution: 0.1 hPa Optional Relative Humidity: Range: 0 to 100% RH Accuracy: ±5% RH at 0 to 90% RH at 20°C Resolution: 0.1% RH Operating Temperature Range: -25 to 55°C (-13 to 131°F) Power: Supply Voltage: 9 to 40 VDC Supply Current: <55 mA (<0.7 W) at 12 VDC NMEA 2000® Load Equivalency Number (LEN): 2 Communications: Available Interface: Serial RS-232, Serial RS-422, CAN Available Protocol: Comma delimited ASCII, NMEA 0183, NMEA 2000 Serial Output Rate: 1 Hz typical. User selectable. 10 Hz maximum recommended Mounting-thread Size on Base: Standard 1"-14 UNS (3/4" NPT optional) Certifications and Standards: CE, IPX6 (IPX4 with optional Relative Humidity sensor), RoHS, IEC61000-4-2, IEC60945, IEC60950_1C, IEC60950_22A, EN55022, EN55024, EN14982 Features Discover the features that make this product stand out. From technical details to special functions – we’ve summarized all the key information for you. NMEA2000 NMEA0183 Yes Measuring type Ultra-sound Integr. terminal resistor

RAYMARINE

Raymarine's RVX1000 sonar unit features award-winning high-resolution 3D Realvision sonar technology, CHIRP Side and DownVision, as well as a powerful 1 kW two-channel CHIRP sonar, making it a versatile solution for fishing on the high seas or on the coast. Powerful all-in-one sonar The sonar unit consists of 5 channels, suitable for deep-sea and coastal fishing. RealVision 3D CHIRP SideVision CHIRP DownVision Low-current, high-frequency CHIRP 1 kW CHIRP sonar (Low, Medium, High CHIRP 50/80/100/160/200 kHz) Advanced sonar functions Reliable and untroubled detection of underwater structures and finding your target fish thanks to the lifelike clarity of the RealVision 3 sonar Rewind your sonar recordings up to 10 minutes! Using the recorded sonar history, you can now see fish and structures in more detail and record your waypoints at your leisure. TruZoom ™ magnification mode makes special details on the target object visible without loss of resolution GPS Track RealVision 3D ™ Sonar with GPS Track uses GPS to provide the most accurate underwater model in real time. Performance optimisation Powerful 3D sonar upgrade solution for the Raymarine eS and gS series multifunction displays. The RVX1000's own quad-core processor makes it possible for previous generations of MFDs to run multiple sonar channels simultaneously, without sacrificing performance. Voltage 10.8 - 31.2 V Power consumption 10.4 W (max.) Power 2.4 A peak, 1.2 A RMS Waterproof IPX6 and IPX7 Operating temperature -25 ° C to + 55 ° C Dimensions 299.4 x 188 x 84.4 mm Connections 1x RVX connector (25 pins) 1 kW connection (11 pins) 1x power connection 1x Raynet connection Sonar compatibility Realvision 3D (CHIRP side and down vision, high frequency 3D sonar) + 1 kW high performance CHIRP Sonar depth High frequency CHIRP: 900 feet Downvision: 600 feet Sidevision: 300ft port and starboard kW = 5000 feet Multifunction display compatibility Axiom / Axiom PRO (LH3.4.xx or higher) Encoder compatibility RealVision encoder (direct connection possible) CPT-S encoder (adapter 24434 necessary) DownVision encoder (adapter 24434 required) Airmar CHIRP (direct connection possible) Includes RVX1000 sonar module, power cable 1.5 m, mounting screws, documentation pack, RayNet network cable 2m

NAVICO

This Active Imaging 3-in-1 HD sonar transom transducer delivers clear sonar images at the highest level. Experience superior clarity and the highest resolution images of fish and structure with Lowrance CHIRP, as well as high-frequency 1.2MHz SideScan and DownScan imaging sonar. DownScan with FishReveal makes it much easier to identify fish under the boat. Experience the difference Active Imaging HD technology is Lowrance's clearest sonar ever, delivering the highest resolution and superior clarity from Lowrance CHIRP, SideScan and DownScan imaging. Active Imaging HD 3-in-1 Experience a new level of detail and clarity, as well as improved target separation, perfect for pinpointing fish-holding areas like rockpiles, standing timber, weedbeds, ditches and drop-offs. DownScan HD Imaging DownScan Imaging helps you easily recognise fish by providing photorealistic images of rocks, standing timber, bottom composition and other underwater structures just beneath the boat. SideScan HD Imaging SideScan is ideal for scanning large underwater areas for fish. This allows you to cover more of a large area in less time and identify areas that are too shallow for your boat - such as a coast or bank. CHIRP Sonar In the classic CHIRP fish finder view you can see fish, structure and the bottom in detailed resolution. FishReveal Get the best view of Lowrance CHIRP sonar and imaging sonar on one display with FishReveal Overlay. FishReveal was first available in DownScan imaging view only and is now also available for SideScan view (requires optional S3100 module). This allows you to identify fish quickly and easily directly in the DownScan or SideScan view without having to reduce the image using a split screen. Clarity is the Goal The new transducer design of the Active Imaging HD transducer not only incorporates three key sonar technologies - Lowrance CHIRP, SideScan and DownScan Imaging, but also significantly improves signal processing. Product Features High Definition SideScan and DownScan Imaging (up to 1.2MHz) provide the most detailed images of fish and structures Lowrance CHIRP with better clarity and target separation FishReveal DownScan view makes fish identification much easier Supports medium and high CHIRP frequencies (83/200 kHz and 455/700/1000/1200 kHz) Intelligent transducer design improves signal clarity Compatible with: Lowrance HDS Pro Lowrance HDS Carbon (S3100 sonar module required) Lowrance HDS Live (S3100 sonar module required) Lowrance Elite FS (S3100 sonar module required) Technical Data Operating temperature -15 to +55 ° C Storage temperature -30 to +70° C Output CHIRP, SideScan, DownScan, Temperature Frequency CHIRP: 80/200 kHz, SideScan: 455/1075 kHz DownScan: 700/1200 kHz Max. Depth Traditional: 305 m, SideScan: 91 m, Downscan: 91 m Waterproof rating IP67 Dimensions (h x w x d) 150 x 83 x 58 mm Weight: 1.21 kg

NAVICO

Navico's Active Imaging 3-in-1 transducer combines the latest sonar technologies with traditional frequencies. The transducer achieves incredibly detailed and high-resolution sonar images without compromising range. Connector: 9 pins. Cable length: 7.6 m. Technical specifications: Operating temperature -15°C to +55°C Storage temperature -30°C to +70°C Cable Length 7.6 m Connectors 9 pins Output Traditional, SideScan, DownScan, Temperature Frequency Traditional: 200 kHz, Chirp: 83 kHz, SideScan: 455kHz, 800 kHz Max. depth Traditional: 305 m, SideScan: 91 m, Downscan: 91 m Contents Active imaging transmitter and matching bracket Compatible with: Simrad GO (9 Pin) Simrad evo NSS3 S Simrad evo NSS3 Simrad NSX B&G Vulcan B&G Zeus3 S B&G Zeus3 Lowrance HDS Pro Lowrance HDS Live Lowrance HDS Carbon Lowrance Hook Reveal (optional adapter cable item: 29599 required) Lowrance Elite Ti2 Lowrance Elite Ti

NAVICO

The Lowrance ActiveTarget 2 system provides the most detailed and clear live views of fish and structure. Watch fish respond to your lure in real time and make quick adjustments so you can catch more fish. Thanks to the highest-resolution and optimized image and stabilisation settings, the Active Target 2 system delivers a precise and crystal-clear live-action view of the underwater world, even in rough conditions Enhancements to the beam broadcast sent by the Active Target 2 system make it possible to view more detailed images even when they are further away from your boat than ever before. More views in more detail High-resolution views allow you to track lure presentation in front, below, and around your boat, or use Scout mode to see an ultra-wide overhead view of structure and fish activity in front of your boat. Forward view: See live underwater structure and fish in front of your boat and perfectly target your next cast. Down view: Read live depth data and see beneath your boat in greater detail to drop your lure right on the fish. Scout view: See a live overhead, wide view of the area in front of your boat to find the best fishing spots and slowly head up to them. Technical Data Interface: Navico Ethernet Current consumption: 1.5 A @ 13.8 V Recommended fuse 3 A Power supply: 10.8 - 31.2 V IP class: IP67 Dimensions black box: 219.3 x 192,1 x 72.9 mm (W x H x D) Transducer dimensions 149.8 x 82.4 x 58.0 mm (W x H x D) Compatible with: Lowrance HDS Pro (only the ActiveTarget2 transducer is required here) Lowrance HDS Live Lowrance HDS Carbon Lowrance Elite FS

NAVICO

The Lowrance ActiveTarget 2 transducer provides the most impressive wide and high-resolution live view of fish and structure. Watch fish respond to your lure in real time and make quick adjustments so you can catch more fish. More views in more detail High-resolution displays allow you to track lure presentation in front, below, and around your boat, or use Scout mode to see an ultra-wide overhead view of structure and fish activity in front of your boat. Forward view: See live underwater structure and fish in front of your boat and perfectly target your next cast. Down view: Read live depth data and see beneath your boat in greater detail to drop your lure right on the fish. Scout view: See a live overhead, wide view of the area in front of your boat to find the best fishing spots and slowly head up to them. Compatible with: Lowrance HDS Pro (Sonar module ActiveTarget 2 required) Lowrance HDS Carbon (Sonar module ActiveTarget 2 required) Lowrance HDS Live (Sonar module ActiveTarget 2 required) Lowrance Elite FS (sonar module ActiveTarget 2 required)

KUS

The NKC42 converter converts analogue sensor data into NMEA2000 data. Can be used for: motor data, tank levels, pressure or temperature data from existing sensors into NMEA2000 networks. There is no power supply required, as the converter feeds from the power supply within the existing network. The suitable voltage is 9 - 16 volts DC. Waterproof: IP67. Operating temperature: -30° C to +80° C. You can connect up to four analogue sensors per converter. The NKC42 converter converts analogue sensor data into NMEA2000 data. Can be used for: motor data, tank levels, pressure or temperature data from existing sensors into NMEA2000 networks. There is no power supply required, as the converter feeds from the power supply within the existing network. The suitable voltage is 9 - 16 volts DC. Waterproof: IP67. Operating temperature: -30° C to +80° C. Compatible sensor parameters can be found in the manual in PDF format. Sensor type Input signal Black water sensor 0 (empty) - 190 (full) ohms Black water sensor 240 (empty) - 33 (full) ohms Fuel sensor 0 (empty) - 190 (full) ohms Fuel sensor 240 (empty) - 33 (full) ohms Freshwater sensor 0 (empty) - 190 (full) ohms Freshwater sensor 240 (empty) - 33 (full) ohms Oil pressure sensor 0-5 bar 10 - 185 ohms Oil pressure sensor 0-10 bar 10 - 185 ohms Engine temperature sensor 301 - 23 ohms Engine oil temperature sensor 362 - 20 ohms Note: Item no. 31968 is required to use the analogue display next to the converter.

RAYMARINE

The Raymarine CPT-70 through-hull transducer measures depth and temperature. Made out of durable urethane. A 10m connection cable is included within the delivery contents. This transducer is only compatible with older series Raymarine Dragonfly units. The A80332 adapter cable is also required for you to operate this sensor with the current series, recognisable by the green locking ring.

NASA

Wireless wind display system with NASA Clipper display and NMEA0183 output. The included data box is mounted below deck and powered via the 12V on-board electrical system. Via a cable connection, the receiver can then pass on the wind direction and wind speed data to a NASA Clipper or another NMEA0183-compatible display.

DIGITAL YACHT

Compass sensor with high speed data query, which it provides to the plotter. Suitable for fiberglass and wooden vessels. Outside installation possible on metal vessels (waterproof IPX7).

RAYMARINE

The Raymarine CP370 delivers extraordinary clear and crisp images and enables automatic operation through the use of ClearPulse technology from raymarine, the next generation digital sonar imaging technoloy.

RAYMARINE

The optional dual-channel CHIRP transducer has a conical angle for the display of underwater targets. The ultra-wide, fan-shaped cone creates the photo realistic Down Vision sonar images. The transducer also provides data for depth and temperature. Comes delivered with a 10 m connection cable. CPT-100 DVS Features: Installation Stern mounted Material Urethane / plastic Max. depth DownVision: approx. 180m (600 ft) / Fishfinder: approx. 270m (900 ft) Frequencies DownVision & CHIRP Fishfinder Beam width (L/H) 25° / 60° Data Depth and temperature Rec. Hull material Fibre glass / metal / wood Cable Length 10m / 33 feet Compatible with the following Raymarine chartplotters: Raymarine a68 Raymarine a78 Raymarine a98 Raymarine a128 Raymarine eS78 Raymarine eS98 Raymarine eS128 Raymarine Element HV (optional adapter cable item: 81727 required) Raymarine AXIOM+ RV (optional adapter cable item no. 24434 required) Raymarine AXIOM DV Raymarine AXIOM RV (optional adapter cable item no. 24434 required) Raymarine AXIOM2 Pro S (optional adapter cable item: 24434 required) Raymarine AXIOM2 Pro RVM (optional adapter cable item: 24434 required) Raymarine AXIOM Pro S (optional adapter cable item: 24434 required) Raymarine AXIOM Pro RVX (optional adapter cable item: 24434 required)

RAYMARINE

Raymarine - Thru-hull transducer CPT-110 for connection to compatible Raymarine DownVision and Fishfinder chartplotters.

RAYMARINE

The optional bronze thru-hull CPT-120 is used to display underwater targets and enables the creation of photorealistic DownVision sonar images. The transducer also provides data for depth and temperature. Delivery includes cable and fairing block. Technical data: Installation Thru-hull Material Bronze Max. depth Downvision: approx. 180 m (600 feet) / Fishfinder: approx. 270 m (900 feet) Frequencies Downvision and CHIRP Fishfinder Beam width (L/H) 25° / 60° Data Depth and temperature Rec. Hull material Fibre glass / wood Cable Length 10 m / 33 feet Supported mounting bracket 0-25° deadrise Compatible with the following Raymarine chartplotters: Raymarine a68 Raymarine a78 Raymarine a98 Raymarine a128 Raymarine eS78 Raymarine eS98 Raymarine eS128 Raymarine Element HV (optional adapter cable item: 81727 required) Raymarine AXIOM+ RV (optional adapter cable item no. 24434 required) Raymarine AXIOM DV Raymarine AXIOM RV (optional adapter cable item no. 24434 required) Raymarine AXIOM2 Pro RVM (optional adapter cable item: 24434 required) Raymarine AXIOM Pro RVX (optional adapter cable item: 24434 required)

RAYMARINE

The Raymarine CPT-S CHIRP in-hull transducer can be installed without needing to drill a single hole and provides accurate depth measurement. Delivery includes a sleeve that is glued to the inside of the hull and filled with a liquid. The liquid improves the transfer of sound waves and ensures reliable data collection. Furthermore, the innovative design allows easy mounting to different hull angles (0 - 25 °). Suitable for hull material: GRP. Technical data Frequencies 170-230 kHz (High CHIRP) Max. Depth 183 m / 600 ft Deadrise angle 0, 12 or 20 ° Suitable hull material GRP Transducer material Plastic (urethane) Cable Length 6 m Connection 9-pin connector Max. hull thickness 28 mm Compatible with the following Raymarine chartplotters: Raymarine a68 Raymarine a78 Raymarine a98 Raymarine a128 Raymarine Element S Raymarine Element HV (optional adapter cable item: 81727 required) Raymarine AXIOM+ RV (optional adapter cable item no. 24434 required) Raymarine AXIOM DV Raymarine AXIOM RV (optional adapter cable item no. 24434 required) Raymarine AXIOM2 Pro S (optional adapter cable item: 24434 required) Raymarine AXIOM2 Pro RVM (optional adapter cable item: 24434 required) Raymarine AXIOM Pro S (optional adapter cable item: 24434 required) Raymarine AXIOM Pro RVX (optional adapter cable item: 24434 required)

RAYMARINE

CPT-S HIGH CHIRP plastic through-hull transducer. Maximum depth: approx. 270 m. With this transducer you can use the fishfinder function (CHIRP) of compatible Raymarine chartplotters. For additional downvision display, we recommend the Raymarine CPT-100 DVS transducer. Technical specifications Installation Through-hull installation Material Plastic Max. Depth approx. 270 m (900 feet) Frequencies CHIRP Fishfinder Beam width (L/H) 25° Data Depth and temperature Rec. Hull material Fibre glass / metal / wood Cable length 10 m Installation diameter 60 mm Installation depth 97 mm Tilt angle of the sonar unit 12° Hull cross-section 15-25° Compatible with the following Raymarine chartplotters: Raymarine a68 Raymarine a78 Raymarine a98 Raymarine a128 Raymarine Element S Raymarine Element HV (optional adapter cable item: 81727 required) Raymarine AXIOM+ RV (optional adapter cable item no. 24434 required) Raymarine AXIOM DV Raymarine AXIOM RV (optional adapter cable item no. 24434 required) Raymarine AXIOM2 Pro S (optional adapter cable item: 24434 required) Raymarine AXIOM2 Pro RVM (optional adapter cable item: 24434 required) Raymarine AXIOM Pro S (optional adapter cable item: 24434 required) Raymarine AXIOM Pro RVX (optional adapter cable item: 24434 required)

RAYMARINE

CPT-S HIGH CHIRP plastic through-hull transducer. Maximum depth: approx. 270 m. With this transducer you can use the fishfinder function (CHIRP) of compatible Raymarine chartplotters. For additional downvision display, we recommend the Raymarine CPT-100 DVS transducer. Technical specifications Installation Through-hull installation Material Plastic Max. Depth approx. 270 m (900 feet) Frequencies CHIRP Fishfinder Beam width (L/H) 25° Data Depth and temperature Rec. Hull material Fibre glass / metal / wood Cable Length 10 m Installation diameter 60 mm Installation depth 97 mm Tilt angle of the sonar unit 20° Hull cross-section 15-25° Compatible with the following Raymarine chartplotters: Raymarine a68 Raymarine a78 Raymarine a98 Raymarine a128 Raymarine Element S Raymarine Element HV (optional adapter cable item: 81727 required) Raymarine AXIOM+ RV (optional adapter cable item no. 24434 required) Raymarine AXIOM DV Raymarine AXIOM RV (optional adapter cable item no. 24434 required) Raymarine AXIOM2 Pro S (optional adapter cable item: 24434 required) Raymarine AXIOM2 Pro RVM (optional adapter cable item: 24434 required) Raymarine AXIOM Pro S (optional adapter cable item: 24434 required) Raymarine AXIOM Pro RVX (optional adapter cable item: 24434 required)

RAYMARINE

Bronze CPT-S HIGH CHIRP through-hull transducer. Maximum depth: approx. 270 m. With this transducer you can use the fishfinder function (CHIRP) of compatible Raymarine chartplotters. For additional downvision display, we recommend the Raymarine CPT-100 DVS transducer. CPT-S HIGH CHIRP Features: Installation Through-hull installation Material Bronze Max. Depth approx. 270m (900 feet) Frequencies CHIRP Fishfinder Beam width (L/H) 25° Data Depth Rec. Hull material Fibre glass / metal / wood Cable Length 10m Installation diameter 60mm Installation depth 97mm Tilt angle of the sonar unit 0° Hull cross-section 7-17° Compatible with the following Raymarine chartplotters: Raymarine a68 Raymarine a78 Raymarine a98 Raymarine a128 Raymarine Element S Raymarine Element HV (optional adapter cable item: 81727 required) Raymarine AXIOM+ RV (optional adapter cable item no. 24434 required) Raymarine AXIOM DV Raymarine AXIOM RV (optional adapter cable item no. 24434 required) Raymarine AXIOM2 Pro S (optional adapter cable item: 24434 required) Raymarine AXIOM2 Pro RVM (optional adapter cable item: 24434 required) Raymarine AXIOM Pro S (optional adapter cable item: 24434 required) Raymarine AXIOM Pro RVX (optional adapter cable item: 24434 required)

RAYMARINE

Bronze CPT-S HIGH CHIRP through-hull transducer. Maximum depth: approx. 270 m. With this transducer you can use the fishfinder function (CHIRP) of compatible Raymarine chartplotters. For additional downvision display, we recommend the Raymarine CPT-100 DVS transducer. CPT-S HIGH CHIRP / 12° tilt angle features: Installation Through-hull installation Material Bronze Max. Depth approx. 270m (900 feet) Frequencies CHIRP Fishfinder Beam width (L/H) 25° Data Depth Rec. Hull material Fibre glass / metal / wood Cable length 10m Installation diameter 60mm Installation depth 97mm Tilt angle of the sonar unit 12° Hull cross-section 7-17° Compatible with the following Raymarine chartplotters: Raymarine a68 Raymarine a78 Raymarine a98 Raymarine a128 Raymarine Element S Raymarine Element HV (optional adapter cable item: 81727 required) Raymarine AXIOM+ RV (optional adapter cable item no. 24434 required) Raymarine AXIOM DV Raymarine AXIOM RV (optional adapter cable item no. 24434 required) Raymarine AXIOM2 Pro S (optional adapter cable item: 24434 required) Raymarine AXIOM2 Pro RVM (optional adapter cable item: 24434 required) Raymarine AXIOM Pro S (optional adapter cable item: 24434 required) Raymarine AXIOM Pro RVX (optional adapter cable item: 24434 required) cpt-s high chirp bronze thru-hull transducer,transducer,raymarine,chirp,cpt-s,thru-hull transducer

RAYMARINE

Bronze CPT-S HIGH CHIRP through-hull transducer. Maximum depth: approx. 270 m. With this transducer you can use the fishfinder function (CHIRP) of compatible Raymarine chartplotters. For additional downvision display, we recommend the Raymarine CPT-100 DVS transducer. CPT-S HIGH CHIRP / 20° tilt angle features: Installation Through-hull installation Material Bronze Max. depth approx. 270m (900 feet) Frequencies CHIRP Fishfinder Beam width (L/H) 25° Data depth Rec. Hull material Fibre glass / metal / wood Cable Length 10m Installation diameter 60mm Installation depth 97mm Tilt angle of the sonar unit 20° Hull cross-section 15-25° Compatible with the following Raymarine chartplotters: Raymarine a68 Raymarine a78 Raymarine a98 Raymarine a128 Raymarine Element S Raymarine Element HV (optional adapter cable item: 81727 required) Raymarine AXIOM+ RV (optional adapter cable item no. 24434 required) Raymarine AXIOM DV Raymarine AXIOM RV (optional adapter cable item no. 24434 required) Raymarine AXIOM2 Pro S (optional adapter cable item: 24434 required) Raymarine AXIOM2 Pro RVM (optional adapter cable item: 24434 required) Raymarine AXIOM Pro S (optional adapter cable item: 24434 required) Raymarine AXIOM Pro RVX (optional adapter cable item: 24434 required)

RAYMARINE

CPT-S HIGH CHIRP plastic thru-hull transducer with 10 metre connection cable. With this transducer, you can use the fishfinder function of the above devices. For additional Downvision display we recommend the Raymarine CPT-100 DVS transducer. CPT-S HIGH CHIRP Features: Installation Through-hull installation Material Urethane / plastic Max. Depth approx. 270m (900 feet) Frequencies CHIRP Fishfinder Beam width (L/H) 25° Data Depth and temperature Rec. Hull material Fiberglass / metal Deadrise angle 0-5° Compatible with the following Raymarine chartplotters: Raymarine a68 Raymarine a78 Raymarine a98 Raymarine a128 Raymarine Element S Raymarine Element HV (optional adapter cable item: 81727 required) Raymarine AXIOM+ RV (optional adapter cable item no. 24434 required) Raymarine AXIOM DV Raymarine AXIOM RV (optional adapter cable item no. 24434 required) Raymarine AXIOM2 Pro S (optional adapter cable item: 24434 required) Raymarine AXIOM2 Pro RVM (optional adapter cable item: 24434 required) Raymarine AXIOM Pro S (optional adapter cable item: 24434 required) Raymarine AXIOM Pro RVX (optional adapter cable item: 24434 required)

RAYMARINE

Note: For use with a Raymarine AXIOM RV multifunction display, the adapter cable 9 pin to 25 pin (SVB no. 24434) is required. Easy to install transom transducer with kick-up bracket. Compatible with the CP100 sonar module and all multifunction displays with built-in CHIRP modules (eg. a68, a78, a98, a128). Max. depth: 275 m. Cable length: 6 m. CPT-S HIGH CHIRP Features: Installation Stern mounted Material Urethane / plastic Max. Depth approx. 270m (900 feet) Frequencies CHIRP Fishfinder Beam width (L/H) 25° Data Depth and temperature Rec. Hull material Fibre glass / metal / wood Cable length 6m / 19 feet Compatible with the following Raymarine chartplotters: Raymarine a68 Raymarine a78 Raymarine a98 Raymarine a128 Raymarine Element S Raymarine Element HV (optional adapter cable item: 81727 required) Raymarine AXIOM+ RV (optional adapter cable item no. 24434 required) Raymarine AXIOM DV Raymarine AXIOM RV (optional adapter cable item no. 24434 required) Raymarine AXIOM2 Pro S (optional adapter cable item: 24434 required) Raymarine AXIOM2 Pro RVM (optional adapter cable item: 24434 required) Raymarine AXIOM Pro S (optional adapter cable item: 24434 required) Raymarine AXIOM Pro RVX (optional adapter cable item: 24434 required)

LCJ CAPTEURS

The CV7 ultrasonic wind sensor is compact and light with very low power consumption. Thanks to ultrasound technology, this wind vane-anemometer is free of mechnical parts. Ideal for sailboats.

LCJ CAPTEURS

The CV7 ultrasonic wind sensor is compact and light with very low power consumption. Thanks to ultrasound technology, this wind vane-anemometer is free of mechnical parts. Ideal for motorboats.

RAYMARINE

Vision under water - see the "real" underwater world under your boat with the CHIRP Downvision™ technology by Raymarine.

AIRMAR

The 2nd generation DST810 plastic through-hull transducer reliably and precisely measures depth, speed and temperature readings in the water. The second generation DST810 incorporates a re-designed paddle wheel sensor for improved accuracy and low-speed performance. The transducer is able to accurately measure slow speeds of 0.3 knots, as well as fast speeds of up to 45 knots, and with NMEA2000 and Bluetooth connectivity, a variety of ways to display data is possible. The DST810 Gen2 also features an integrated vessel attitude sensor, which measures heel and trim data, and can be used to calibrate speed-through-water. The DST810 Gen2 sensor can also be calibrated quickly and easily via the Bluetooth interface using the Airmar Cast app, making the sensor independent of other onboard instruments. The device can measure depths up to 100 m, speeds up to 45 knots and temperatures up to +40 °C. A 5 Hz signal output ensures smooth playback on your display device. Wireless connection via Bluetooth also allows easy calibration of sensor data via the Airmar Cast app. Airmar CAST™ App Views Technical Data Frequency 235 kHz Power consumption <200 mA (NMEA2000) LEN 3 Beam width 10 x 44 degrees Hull deadrise 0 to 22 degrees Min. depth 0.5 m Max. Depth 100 m Speed range 0.3 - 45 knots Temperature sensor measuring range -10 to +40 °C Bluetooth Yes Connectors NMEA2000 / Micro-C (male) Cable length 6 m Weight: 0.9 kg Note Smartphone not included

RAYMARINE

The gen 2 DST810 plastic through-hull transducer reliably and precisely measures depth, speed and temperature readings in the water. The second generation DST810 incorporates a re-designed paddle wheel sensor for improved accuracy and low-speed performance. The transducer is able to accurately measure slow speeds of 0.3 knots, as well as fast speeds of up to 45 knots, and with NMEA2000 and Bluetooth connectivity, a variety of ways to display data is possible. The DST810 Gen2 also features an integrated vessel attitude sensor, which measures heel and trim data, and can be used to calibrate speed-through-water. The DST810 Gen2 sensor can also be calibrated quickly and easily via the Bluetooth interface using the Airmar Cast app, making the sensor independent of other onboard instruments. The device can measure depths up to 100 m, speeds up to 45 knots and temperatures up to +40 °C. A 5 Hz signal output ensures smooth playback on your display device. Wireless connection via Bluetooth also allows easy calibration of sensor data via the Airmar Cast app. Airmar CAST™ App Views Technical data Frequency 235 kHz Output 100 W Beam width 10 x 44 degrees Hull deadrise 0 to 22 degrees Min. depth 0.5 m Max. depth 100 m Speed range 0.3 - 45 knots Temperature sensor measuring range -10 to +40° C Bluetooth Yes Connectors SeaTalkNG Cable length 2 m Weight: 0.9 kg Note Smartphone not included

RAYMARINE

Plastic through-hull transducer with flat design for depth and temperature readings. The tilt angle of the depth sonar element is 12 degrees. The transducer is suitable for both GRP and metal hulls. Should not be used in wooden hulls; instead, bronze or stainless steel through-hull transducers are recommended. The diameter of the hull opening is 51 mm. The transducer operates at 235 kHz. Tranduscer is connected to the SeaTalkNG network directly. If SeaTalkNG is not available, we recommend the Raymarine SeaTalkNG starter kit. This transducer is compatible with all current Raymarine multifunction displays because it is directly connected to the SeaTalkNG network. Cable length: 2 m. DT800 features: Installation Through-hull installation Material Plastic Frequencies 235 kHz Data Depth and temperature Rec. hull material Fiberglass / metal Installation diameter 51mm Tilt angle of the sonar unit 12°