Unknown Brand

Extremely abrasion-resistant, tearproof and cut-resistant shore connection cable for both fixed installation and mobile use. The cable offers a degree of high flexibility and durability, even at low temperatures.

Unknown Brand

Compact connecting terminal with five terminal points for cables 0.2 - 4 mm². Installation adapter for standardised installation Connect fine-wire conductors, single and multi-wire conductors. Extremely easy to use, no tools required. Simply lift the lever, insert and close. Approvals: DNV GL (Germanischer Lloyd) / ABS (American Bureau of Shipping) / LR (Lloyd's Register) Stripping length: 11 mm Dimensions (WxHxD): 30 x 8.6 x 18.8 mm

Unknown Brand

Satellite cable, double shielded, with meter marking. For all kinds of digital signals, 75 Ohms. Outer diameter: 7 mm Bending radius: 45 mm Shielding: 100 dB Impedance: 75 Ohm Color: white Type: SAT Coax Shielding: 2-way shielding, aluminum foil / aluminum braid

SEATEC

With this cable connector, you can split an incoming line into two outgoing ones. For example, you can split a positive and a negative line into two individual lines without any complicated soldering work. Colour-coded levers make it easier to allocate wires. Simply open the levers of the quick-connect terminal and close again once the wire is inserted. The quick connectors can be quickly released and reused as needed. Use the cable splitter in a switch cabinet, junction box, instrument panel or at other locations in your on-board electrical installation. Featuring a compact size for general purpose application. Technical specifications Operating voltage 250V max Load capacity: 32A max Suitable for cable cross sections: 0.2 - 4.0 mm 2 (solid wire) 0.2 - 2.5 mm2 (wire strand) Length of stripped insulation: 10 mm Number of connections: 2 inputs / 4 outputs (2 per terminal) Dimensions: 23 mm (L) x 31 mm (H) x 13.5 mm (B) Housing material: Nylon (PA) Internal contact material: Bronze phosphorus Spring material: Stainless steel Temperature operating range: -20º C to 105º C Certification: CE, ROHS

SEATEC

With this cable connector, you can split an incoming line into three outgoing ones. For example, you can split a positive and a negative line into three individual lines without any complicated soldering work. Colour-coded levers make it easier to allocate wires. Simply open the levers of the quick-connect terminal and close again once the wire is inserted. The quick connectors can be quickly released and reused as needed. Use the cable splitter in a switch cabinet, junction box, instrument panel or at other locations in your on-board electrical installation. Featuring a compact size for general purpose application. Technical specifications Operating voltage 250V max Load capacity: 32A max Suitable for cable cross sections: 0.2 - 4.0 mm 2 (solid wire) 0.2 - 2.5 mm2 (wire strand) Length of stripped insulation: 10 mm Number of connections: 2 inputs / 6 outputs (3 per terminal) Dimensions: 33 mm (L) x 31 mm (H) x 13.5 mm (W) Housing material: Nylon (PA) Internal contact material: Bronze phosphorus Spring material: Stainless steel Temperature operating range: -20º C to 105º C Certification: CE, ROHS

SEATEC

With this cable connector, you can split an incoming line into two outgoing ones. For example, you can split a positive, a negative and a data line into two individual lines without complicated soldering work. Colour-coded levers make it easier to allocate wires. Simply open the levers of the quick-connect terminal and close again once the wire is inserted. The quick connectors can be quickly released and reused as needed. Use the cable splitter in a switch cabinet, junction box, instrument panel or at other locations in your on-board electrical installation. Featuring a compact size for general purpose application. Technical specifications Operating voltage 250V max Load capacity: 32A max Suitable for cable cross sections: 0.2 - 4.0 mm 2 (solid wire) 0.2 - 2.5 mm2 (wire strand) Length of stripped insulation: 10 mm Number of connections: 3 inputs / 6 outputs (2 per terminal) Dimensions: 33 mm (L) x 30 mm (H) x 13.5 mm (W) Housing material: Nylon (PA) Internal contact material: Bronze phosphorus Spring material: Stainless steel Temperature operating range: -20º C to 105º C Certification: CE, ROHS

SEATEC

With this cable connector, you can split an incoming line into three outgoing ones. For example, you can split a positive, a negative and a data line into three individual lines without complicated soldering work. Colour-coded levers make it easier to allocate wires. Simply open the levers of the quick-connect terminal and close again once the wire is inserted. The quick connectors can be quickly released and reused as needed. Use the cable splitter in a switch cabinet, junction box, instrument panel or at other locations in your on-board electrical installation. Featuring a compact size for general purpose application. Technical specifications Operating voltage 250V max Load capacity: 32A max Suitable for cable cross sections: 0.2 - 4.0 mm 2 (solid wire) 0.2 - 2.5 mm2 (wire strand) Length of stripped insulation: 10 mm Number of connections: 3 inputs / 9 outputs (three per connection) Dimensions: 48 mm (L) x 31 mm (H) x 13.5 mm (W) Temperature operating range: -20º C to 105º C Certification: CE, ROHS

Unknown Brand

Multi-conductor data cable. Conductor diameter : 0.34 mm. Suitable for GPS, radar, chart plotter, autopilots, wind instruments and NMEA data connections. Two models available.

Unknown Brand

8-core PVC data and control cable with a 0.14 mm² wire diameter. Ideal for electronic control systems in the milliampere range, such as the transmission of GPS, radar and NMEA data. External diameter: approx. 6 mm. Self-extinguishing and flame retardant PVC. Coat color: gray. Price per meter.

Unknown Brand

CU-wire, tinned. Good abrasion and notch resistance, good oil and weather resistance. The ideal cable for the connection of luminaires, heaters, electrical equipment (insulation class B), switchgear and distribution boards.

Unknown Brand

Multi-core installation cable for connection, measurement, monitoring and control wires. The cable offers great flexibility and is suitable for medium mechanical stress in dry, damp and wet rooms.

Unknown Brand

Dual-core, flexible installation cable according to DIN 72551. Particularly suitable for installation of position lights, pumps and other consumers. Seawater resistant, double insulation.

Unknown Brand

Single core, flexible control cables according to DIN 72551. Suitable for installation of lighting, set of signals, engine, pumps, electrical and other equipment. Seawater-resistant PVC insulation.

SEATEC

These inline connectors are perfect for connecting two wire ends quickly and securely. Simply open the orange lever of the quick-connect terminal and close again once the wire is inserted, making cable connection quick and easy without additional tools. The quick connectors can be quickly released and reused as needed. Use the cable connector in a switch cabinet, junction box, instrument panel or at other locations in your on-board electrical installation. Featuring a compact size for general purpose application. Technical specifications Operating voltage 250V max Load capacity: 32A max Suitable for cable cross sections: 0.2 - 4.0 mm 2 (solid wire) 0.2 - 2.5 mm2 (wire strand) Length of stripped insulation: 10 mm Number of poles: 1 Dimensions: 31.5 mm (L) x 13.5 mm (H) x 8.9 mm (W) Temperature operating range: -20º C to 105º C Certification: CE, ROHS

SEATEC

With this cable connector, you can split an incoming line into two outgoing ones. Simply open the levers of the quick-connect terminal and close again once the wire is inserted. Featuring a modular design, so you can combine several units into one block. Just behind the locking levers are openings for a sensor tip, so you can quickly check whether there is voltage on the respective wire. The quick connectors can be quickly released and reused as needed. Use the cable splitter in a switch cabinet, junction box, instrument panel or at other locations in your on-board electrical installation. Featuring a compact size for general purpose application. Technical specifications Operating voltage 250V max Load capacity: 32A max Suitable for cable cross sections: 0.2 - 4.0 mm 2 (solid wire) 0.2 - 2.5 mm2 (wire strand) Length of stripped insulation: 10 mm Number of connections: 1 input / 2 outputs Dimensions: 13.9 mm (L) x 31.5 mm (H) x 13.5 mm (W) Temperature operating range: -20º C to 105º C Certification: CE, ROHS

SEATEC

With this cable connector, you can split an incoming line into three outgoing ones. Simply open the levers of the quick-connect terminal and close again once the wire is inserted. Featuring a modular design, so you can combine several units into one block. Just behind the locking levers are openings for a sensor tip, so you can quickly check whether there is voltage on the respective wire. The quick connectors can be quickly released and reused as needed. Use the cable splitter in a switch cabinet, junction box, instrument panel or at other locations in your on-board electrical installation. Featuring a compact size for general purpose application. Technical specifications Operating voltage 250V max Load capacity: 32A max Suitable for cable cross sections: 0.2 - 4.0 mm 2 (solid wire) 0.2 - 2.5 mm2 (wire strand) Length of stripped insulation: 10 mm Number of connections: 1 input / 3 outputs Dimensions: 31.5 mm (L) x 13.5 mm (H) x 18.9 mm (W) Temperature operating range: -20º C to 105º C Certification: CE, ROHS

SEATEC

These inline connectors are perfect for connecting two wire ends quickly and securely. The cable connector is especially suitable for applications where the connection has to be disconnected frequently. To do this, simply pull the two halves of the connector apart. Simply open the orange lever of the quick-connect terminal and close again once the wire is inserted. Featuring modular design, so you can combine several units into one block. The quick connectors can be quickly released and reused as needed. Use the cable connector in a switch cabinet, junction box, instrument panel or at other locations in your on-board electrical installation. Featuring a compact size for general purpose application. Technical specifications Operating voltage 250V max Load capacity: 32A max Suitable for cable cross sections: 0.2 - 4.0 mm 2 (solid wire) 0.2 - 2.5 mm2 (wire strand) Length of stripped insulation: 11 - 13 mm Number of poles: 1 Dimensions: 26 mm (L) x 15 mm (H) x 7.5 mm (W) per connector half Temperature operating range: -20º C to 105º C Certification: CE, ROHS

Unknown Brand

NYY-J cable for use in dry and damp rooms as well as outdoors in the ground and in water. Flame retardant Price per metre.

Unknown Brand

3-core installation cable with a rubber cover for onboard use and 230 v supply. Seawater and oil resistant insolation. Suitable for fexible use and fixed installation. Available in two versions.

Unknown Brand

This satellite coaxial cable can be used for a wide range of digital signals and features insulation made of a special PE compound, foamed using gas injection and a screening capacity of 130 dB. With metre marking. Lead and silicone free. Price per metre. Technical Data Impedance: 75 Ohm Screening capacity: 130 dB Screening class: A+ Compliant with: EN 50117 Inner conductor Ø: 1.13 mm Inner conductor material: copper Outer conductor Ø: 4.8 mm Outer conductor material: aluminium Outer Ø: 7 mm Temperature range: -25 to +70 °C

Unknown Brand

Temperature-resistant and halogen-free single cores, CU-strand, tinned. Admission: DNV. Temperature range,  flexible: -35°C to +120°C, fixed: -55°C to +145°C. Available in various colours.

Unknown Brand

This SOLARFLEX®-X H1Z2Z2-K single core cable is certified in accordance with TÜV and VDE and meets the highest quality standards that are characteristic of HELUKABEL® products. The cables are used for wiring solar modules in both isolated and grid-connected photovoltaic systems. Construction Tin-plated copper strand, fine-wire produced and tested according to DIN VDE 0295 cl. 5 / IEC 60228 cl. 5 5 Core insulation: cross-linked special compound x = without protective conductor outer sheath: cross-linked special compound Properties Resistant to: UV radiation, ozone, weather influences, water For outdoor use Buriable Halogen-free Tests Halogen-free acc. to DIN VDE 0482-754-1 / DIN EN 60754-1 / IEC 60754-1 Flame-retardant acc. to DIN VDE 0482-332-1-2 / DIN EN 60332-1-2 / IEC 60332-1-2 Smoke density acc. to DIN VDE 0482-1034-1+2 / DIN EN 61034-1+2 / IEC 61034-1+2 UV-resistant acc. to DIN VDE 0283-618 / DIN EN 50618 Appendix E Ozone-resistant acc. to DIN VDE 0283-618 / DIN EN 50618 Weather-resistant acc. to DIN VDE 0283-618 / DIN EN 50618 Appendix E Water-resistant acc. to DIN VDE 0285-525-2-21 / DIN EN 50525-2-21 Appendix E DC Voltage resistance of the insulation acc. to DIN VDE 0283-618 / DIN EN 50618 Tab. 2 Certifications and approvals: EAC TÜV Rheinland Note The conductor is produced in metric (mm²), AWG specifications are approximate and are for guidance only Use SOLARFLEX®-X H1Z2Z2-K is used for wiring solar modules. Can be laid underground, recommended in pipe. Not suitable for permanent installation in water. The maximum permissible DC voltage of the system in which the cable is used must not exceed 1.8 kV. The cable is suitable for use in and on protectively insulated devices and systems (protection class II).

Unknown Brand

This high-quality speaker cable meets higher safety demands, as it is flame retardant with low smoke formation. Resistant to fire, so that important systems continue to function. Price per metre.

Unknown Brand

Connect cables quickly and securely with this splicing connector. Special blade contacts make stripping unnecessary. Available in two sizes and colours. Delivery contents: 20 x

Unknown Brand

Flexible flat installation cables consisting of three copper wires (Cu), double insulated. Available in different wire cross sections. Colour: black Technical Data Outer casing material: PVC Wire insulation: PVC Nominal voltage: U0 / U 300/300 V Test voltage: 2000 V Breakdown voltage: min. 4000 V Temperature range: Flexible: -5 to +70 °C Fixed: -40 bis +70 °C Norms PVC flexible line: DIN VDE 0285-525-2-11 / DIN EN 50525-2-11 IEC 60227-5 Bare copper strands: DIN VDE 0295 Cl.5 Wire insulation: DIN VDE 0207-363-3 / DIN EN 50363-3 Outer material: DIN VDE 0207-363-4-1 / DIN EN 50363-4-1 Checks: DIN VDE 0482-332-1-2 DIN EN 60332-1-2 IEC 60332-1 Note: The indicated outer diameter values are approximate values, minimal deviations possible.

Unknown Brand

7-wire installation cable for trailer. Suitable for flexible application and fixed cable-laying. High-grade PVC insulation according to DIN VDE 0281. Price per meter.

Unknown Brand

Two-core installation cable for use with medium mechanical stresses. For flexible use with free movement without tensile stress.

Unknown Brand

Compact connecting terminal with two points for cables 0.2 - 4 mm². Installation adapter for standardised installation Connect fine-wire conductors, single and multi-wire conductors. Extremely easy to use, no tools required. Simply lift the lever, insert and close. Approvals: DNV GL (Germanischer Lloyd) / ABS (American Bureau of Shipping) / LR (Lloyd's Register) Stripping length: 11 mm

Unknown Brand

Compact connecting terminal with three points for cables 0.2 - 4 mm². Installation adapter for standardised installation Connect fine-wire conductors, single and multi-wire conductors. Extremely easy to use, no tools required. Simply lift the lever, insert and close. Approvals: DNV GL (Germanischer Lloyd) / ABS (American Bureau of Shipping) / LR (Lloyd's Register) Stripping length: 11 mm

Unknown Brand

Compact connector for cable cross sections of 0.2 - 4.0 mm². This connector is extremely easy to use. No tools required, simply lift the lever, insert the cable, and close. Dimensions (LxWxH): 35.5 x 8.1 x 8.9 mm.